V8 advantage headlight washer fuse
V8 advantage headlight washer fuse
Author
Discussion

Buzzi77

Original Poster:

169 posts

41 months

Friday 20th March
quotequote all
Before writing this post, I searched for various solutions and forum posts, but I can't figure out if removing the fuse listed as F26 actually deactivates the windshield washer pump as well. This is based on my research, because F26 – 20A (yellow) powers the windshield washer pump and the headlight washer pump, so the second fuse wouldn't exist. Is this possible? I'll also include a picture of my fuse box. Thanks for your help.

LTP

2,936 posts

137 months

Friday 20th March
quotequote all
According to an old workshop manual I downloaded, F48 and Relay R7A is screen wash; F26 and Relay 10 is headlamp wash.


Buzzi77

Original Poster:

169 posts

41 months

Friday 20th March
quotequote all
LTP said:
According to an old workshop manual I downloaded, F48 and Relay R7A is screen wash; F26 and Relay 10 is headlamp wash.

This is what I can't understand either, as they give me answers about fuse 26. But if I remove it, the windshield washers don't work anymore, not just the headlight washers, so this makes me think that there is a single fuse that controls them.

Greathey

181 posts

81 months

Saturday 21st March
quotequote all
Is it possible to disconnect the wires to the headlights washers only? I also don't want them to pop out everytime I use windscreen washer

DB9S Paul

204 posts

57 months

Sunday 22nd March
quotequote all
Removing Fuse 26 should just stop the headlight washers from working. There are no wires to the washers, only the pump and they shouldn't pop out everytime you use the screen washers, once every sixth time when you have the headlights on.

If the car is registered 2009 or later then you need headlight washers for the MOT.

stevenichols

123 posts

107 months

Sunday 22nd March
quotequote all
I agree. After fixing my washer mounts, which had broken, I removed Fuse 26 to stop them working (but could always be put back if need be). Are you sure the windscreen washers don’t work with Fuse 26 removed? The easiest solution after that is to remove the power plug to the headlight washer pump. It will take 10 seconds to do, but two hours to remove the inner wheel arch!

Ryan john

8 posts

4 months

Sunday 22nd March
quotequote all
On my 07 V8V, pulling the headlamp washer fuse does not disable the windscreen washers. I’ve had it like this for years because it is not an mot fail for this production year

Buzzi77

Original Poster:

169 posts

41 months

Friday 27th March
quotequote all
Ok. In the end they activated and my headlight washer cover broke. I have already ordered it. My headlight is misaligned with the bodywork . Possible that the 2005 v8 vantage registered 2006 we have a single fuse For headlight washers and window washers? If I remove the 26 the window cleaners no longer work.

I have to disconnect the pump from under the wheel...

Greathey

181 posts

81 months

Friday 27th March
quotequote all
I did remove fuse 26 in my 4.3 V8V and all is well

https://www.startmycar.com/aston-martin/vantage/in...

Buzzi77

Original Poster:

169 posts

41 months

Saturday 28th March
quotequote all
In order not to leave the discussion open and help other friends my aston martin vantage v8 2005 fuse is this one let's try to red
N 22. Not like everyone on the 26th. If I remove the 26 the windshield wipers no longer work.

Davil

663 posts

51 months

Sunday 29th March
quotequote all
Interesting. I used my windscreen wipers for the first time last Sunday as it was a drive day and was raining.