Virage / DB9.2 - Front Bumper Removal.
Discussion
Hello everyone,
I hope everyone is keeping well.
I would like to remove my front bumper to perform a number of jobs.....front mesh needs sorting, the front splitter needs replacing, and the bumper needs repainting and PPF'ed. From what I have read, this is a bit of a pain in the backside - does anyone have any experience or tips.
Many thanks.
Phil.
I hope everyone is keeping well.
I would like to remove my front bumper to perform a number of jobs.....front mesh needs sorting, the front splitter needs replacing, and the bumper needs repainting and PPF'ed. From what I have read, this is a bit of a pain in the backside - does anyone have any experience or tips.
Many thanks.
Phil.
Well if it's like the one on my early DB9 it's straightforward, I've done it a few times now.
First you need to remove the front wheels, then the undertray plus wheel liners, then remove both airboxes.
After that there are a few small bolts either side inside the front wings to undo and finally there are a couple of clips right at the inside front which needs a screwdriver then the bumper should come off, get a helper to help you support it.
On yours you'll need to unclip the parking sensors once off.
I think Aston 1936 has a youtube guide.
Give it a go.
First you need to remove the front wheels, then the undertray plus wheel liners, then remove both airboxes.
After that there are a few small bolts either side inside the front wings to undo and finally there are a couple of clips right at the inside front which needs a screwdriver then the bumper should come off, get a helper to help you support it.
On yours you'll need to unclip the parking sensors once off.
I think Aston 1936 has a youtube guide.
Give it a go.
Edited by paulrog1 on Saturday 6th June 19:50
Gassing Station | Aston Martin | Top of Page | What's New | My Stuff