Headers and exhaust from alibaba - V12 Vantage
Headers and exhaust from alibaba - V12 Vantage
Author
Discussion

stephane-9crpw

Original Poster:

12 posts

Wednesday 4th November
quotequote all
Hi all, I am looking for an exhaust and headers for my V12 vantage manual (2011)

I find the prices insanes ...

I've seen videos of people buying from alibaba and was wondering if anyone here had done it ?

Thanks

nickv12

1,571 posts

114 months

Wednesday 4th November
quotequote all
roflroflrofl

There are still 148 days until 1st April…

stephane-9crpw

Original Poster:

12 posts

Wednesday 4th November
quotequote all
The joke is paying 15k for something made in China anyways
But to each his own

LTP

3,158 posts

143 months

Wednesday 4th November
quotequote all
stephane-9crpw said:
The joke is paying 15k for something made in China anyways
But to each his own
Quicksilver - made in UK
Bamford Rose - made in the UK
VAP (Velocity Automotive Products) - made in British Columbia, Canada

_Rodders_

5,259 posts

50 months

Wednesday 4th November
quotequote all
Buy on credit card, you could probably find something to get your money back on and then you've got a free experiment.

Wasn't it an Alibaba exhaust on TDC's M3? Looks like hasn't fallen off yet.

nn7man

169 posts

109 months

Wednesday 4th November
quotequote all
You must be utterly insane OP! No-one in their right mind would put Chinese junk on an Aston. If you do, just hope it's never spotted if you want to move it on. It will be totally unsaleable.

cliffords

4,701 posts

54 months

Wednesday 4th November
quotequote all
nn7man said:
You must be utterly insane OP! No-one in their right mind would put Chinese junk on an Aston. If you do, just hope it's never spotted if you want to move it on. It will be totally unsaleable.
I expect there are already Chinese components on an Aston Martin car

LTP

3,158 posts

143 months

Wednesday 4th November
quotequote all
cliffords said:
I expect there are already Chinese components on an Aston Martin car
Not so much after the accelerator pedal debacle a few years ago, I wouldn’t think.

Davil

780 posts

57 months

Thursday 5th November
quotequote all
You know when really bad parents have their children taken from them…

Watermead

76 posts

59 months

Thursday 5th November
quotequote all
Friend of mine just put an X pipe from AliExpress on his DB9 in place of the secondary cats, fitted fine and appears to be of decent quality. I have been looking at the headers also to get rid of the primary cat known potential issues, but not ready to dive in yet for the same reasons as the OP, and finding someone to fit them.
Some things I would be wary of getting off AliExpress such as crystal keys or even oil filters and the such like, but things like exhaust components I am a bit more open to if I hear good things of them.

nickv12

1,571 posts

114 months

Thursday 5th November
quotequote all
To be clear - it’s not a question of the country Of manufacture. China has some of the most advanced manufacturing facilities in the world. Its supply line is probably second to none.

No. The question is of design integrity, manufacturing processes and quality control. It could be made 1 mile from Gaydon, but if a bad clone and knock-off, have grave unforeseen consequences to the engine or beyond.

Engineers don’t spend years designing and perfecting components in the first place because it’s “fun”.

LTP

3,158 posts

143 months

Thursday 5th November
quotequote all
nickv12 said:
Engineers don t spend years designing and perfecting components in the first place because it s fun .
Actually, we do - but I get the point you're making.

In fact, as a project manager it was sometimes hard to stop the bloody engineers having too much fun fiddling and refining the parts and get them to release the sodding things into production so they could actually be made

typo fixed and appalling sentence structure partially corrected

Edited by LTP on Thursday 5th November 13:16

8Tech

2,221 posts

229 months

Thursday 5th November
quotequote all
LTP said:
stephane-9crpw said:
The joke is paying 15k for something made in China anyways
But to each his own
Quicksilver - made in UK
Bamford Rose - made in the UK
VAP (Velocity Automotive Products) - made in British Columbia, Canada
I have the David Appleby Engineering tubular manifolds and am very pleased with them. They also remap the ECU for the change in O2 sensor location.








Edited by 8Tech on Thursday 5th November 10:21

8Tech

2,221 posts

229 months

Thursday 5th November
quotequote all

8Tech

2,221 posts

229 months

Thursday 5th November
quotequote all


For some reason, I could not upload all 3 in one post????

stephane-9crpw

Original Poster:

12 posts

Thursday 5th November
quotequote all
Well thanks for the answers I can't post links for the moment it seems but I found some parts taht look nice on alibaba for those interested

around 600 for the exhaust and around 700 for the headers ...

_Rodders_

5,259 posts

50 months

Thursday 5th November
quotequote all
Not throwaway money then. That would be my worry.

I'd want to hold them in my hands before actually buying.

You can buy a whole car body shell from China and it looks great from 20ft.

Can't bolt much up to it though without a drill and grinder.

stephane-9crpw

Original Poster:

12 posts

Thursday 5th November
quotequote all
_Rodders_ said:
Not throwaway money then. That would be my worry.

I'd want to hold them in my hands before actually buying.

You can buy a whole car body shell from China and it looks great from 20ft.

Can't bolt much up to it though without a drill and grinder.
500 is throwaway money when you have an aston ... but I can't imagine paying 15.000€ for a steel exhaust, this is insane

I am sure it bolts the same and even if it requires a bit of fiddeling, that will not be 10.000 worth of it

8Tech

2,221 posts

229 months

Thursday 5th November
quotequote all
Agreed, not throwaway money but an epic job to do if it doesnt fit!

_Rodders_

5,259 posts

50 months

Thursday 5th November
quotequote all
We'll have to agree to disagree on the amount of money you need before the sum becomes throwaway or not but I bet there's plenty of Aston owners who don't consider £500 throwaway money.

Don't forget it needs fitting too and having taken headers in and out of tight spaces 20 times to get the fit right it can be multiple days work if you're doing it on your drive.

Or at best £100ph for someone to do it for you.