STi brake discs - replacement

[paulmoonraker]

Hi all,

My front brake discs look shot. A couple of massive groves seem to have found their way into the surface (crap from the last track day stuck between the pad perhaps). Anyway, any recommendations for replacements? Also, is it an easy DIY jobbie?

It's a 2005 STi. PCD 114.

Thanks

[5paul5]

Give Godspeed a try, found them excellent and very helpfull.

[Group N]

Try Alyn at AS Performance, he`ll keep you right

[Vixpy1]

Group N said:

Try Alyn at AS Performance, he`ll keep you right

+1

[paulmoonraker]

Thanks lads. Easy DIY job? (I love a Sunday afternoon car job).

[Hol]

Very easy job.

Just unbolt the caliper. them the caiper brackets. the disk screws and they should pull off after a whach with a rubber mallet.

Make sure the facings are clean and you have removed all the oil from the replacements. You should also fit new pads.

30mins a side should be about right.

[paulmoonraker]

Hol said:

Very easy job.

Just unbolt the caliper. them the caiper brackets. the disk screws and they should pull off after a whach with a rubber mallet.

Make sure the facings are clean and you have removed all the oil from the replacements. You should also fit new pads.

30mins a side should be about right.

Thanks mate. I like to do as much as I can myself. I could do with some new pads also as I suspect there is some st wedged in my existing ones...

[kin quick]

Don't forget the copper grease!!

[markCSC]

Hol said:

Make sure the facings are clean and you have removed all the oil from the replacements.

I use the Mrs's nail varnish remover for this job. She loves it when I hand her back the grubby bottle

this might help as well http://bbs.scoobynet.com/essex-scooby-crew-362/819...

Edited by markCSC on Friday 30th September 09:44

[paulmoonraker]

markCSC said:

I use the Mrs's nail varnish remover for this job. She loves it when I hand her back the grubby bottle

this might help as well http://bbs.scoobynet.com/essex-scooby-crew-362/819...

Edited by markCSC on Friday 30th September 09:44

Awesome - thanks

[AWG]

+1 Godspeed

Have heard negative things about EBC discs, any one found any issues?