Legacy Bulkhead...

[Lewis's Friend]

Soon, im going to be installing an amp/sub system into a W-reg Legacy estate. And being somewhat lazy, i was hoping someone could tell me where the power lead from the battery can be threaded through the front bulkhead. Any help with this would be appreciated so i dont have to crawl around the enginebay for hours on end following wires....

Cheers

[ScoobieWRX]

Vixpy1 is the man to tell you about that as he is the Legacy man or alternatively see GravelBen as he owns one too, but i imagine there must be holes in the bulkhead blocked with rubber gromets you would poke a small hole into to feed your power cable through. Those holes will lead into the cabin so that's probably where to start.

[Lewis's Friend]

Ok. Thanks for that. I guess I'll have to stick my head under the bonnet and look...

[adamfraser]

There should be a rubber gromet blocking a hole in the Bulkhead on the passenger side behind the glovebox compartment, if it is not there, there is bound to be one somewhere, If I get the chance I'll have a scout around one of the Legacys at work tomorrow.

Edited by adamfraser on Wednesday 13th August 20:40