E46 M3 engine into an E36? Any problems with this
E46 M3 engine into an E36? Any problems with this
Author
Discussion

Darranu

Original Poster:

347 posts

251 months

Tuesday 8th May 2012
quotequote all
Hi
After doing a few trackdays in my e36 328 track car and finishing the suspension and brake upgrades I've started looking towards the engine.
The simple and easiest route would just be to fit an e36 3L M3 lump but I've come across an e46 M3 engine at the right price and was wondering if this would go without to much messing about.

I know it's cheaper just to buy one which is done instead of building it yourself but me and the old man enjoy it and it spreads the cost over time.

Any advice would be gratfully recieved
Regards,
Darran

rumple

15,415 posts

182 months

Tuesday 8th May 2012
quotequote all
It will physically fit, it'll be the electronics that will cause you hassel, is be having a close look at Z3M's as these used both, I've always wondered why no one ever fit an s50 to a 330, or a steptronic to a e36

Darranu

Original Poster:

347 posts

251 months

Tuesday 8th May 2012
quotequote all
Thanks for the response,
I know what your saying regarding the electronics. I had visions of getting the lump at the right money but then spending a forture on all the ancilliaries etc and getting half way through and wishing that I'd just payed th money and stuck to a e36 M3 engine swap instead.
D

buggalugs

9,296 posts

268 months

Tuesday 8th May 2012
quotequote all
I think most people swapping S54's into things end up using standalones...

rumple

15,415 posts

182 months

Tuesday 8th May 2012
quotequote all
Getting things like the e36 instrument cluster to work, things like that, that said get a cluster of a z3m with an s54, and any other bits

LandingSpot

2,084 posts

244 months

Saturday 12th May 2012
quotequote all
A friend of mine is having this exact operation done at the moment. The car is almost ready for some track days. It's been lovingly assembled over the last 6 months, weld in cage, fully stripped, AP Six pots, M3 diff, 888s.

Here are a couple of pictures...




4rephill

5,171 posts

209 months

Sunday 13th May 2012
quotequote all
LandingSpot said:
A friend of mine is having this exact operation done at the moment. The car is almost ready for some track days. It's been lovingly assembled over the last 6 months, weld in cage, fully stripped, AP Six pots, M3 diff, 888s.

Here are a couple of pictures...



Has he had the diff mount areas strengthened? They are known to crack and tear on the standard cars when used in anger!