E38 740 chain guide problems
E38 740 chain guide problems
Author
Discussion

ShockDiamonds

Original Poster:

106 posts

179 months

Tuesday 8th May 2012
quotequote all
Was thinking of replacing my E38 750i (advert to follow over the next day or so) with a 740i. Fancy a V8. 2000 or 2001 reg. But I've recently been told that they are increasingly suffering from chain guide-related issues, as the part is made of plastic and they are starting to get brittle and break up with age, with obvious resultant problems. Chap that told me knows his stuff, just wanted to know whether any owners out there had the issue...Costs around £1700 apparently, even if done as a preventative measure...

danielw

210 posts

279 months

Wednesday 9th May 2012
quotequote all
I'm really curious as to why you'd want to go from a V12 750 to a V8 740?

I have been thinking about perhaps making a move from an E38 750i to an E39 M5. This is of course the same sort of thing but the V12 seems bullet proof and it is my lazy weekend motorway car and so I worry that I may end up with a not bullet proof and not relaxing replacement.


ShockDiamonds

Original Poster:

106 posts

179 months

Saturday 12th May 2012
quotequote all
Fuel efficiency now.

8Tech

2,221 posts

229 months

Wednesday 16th May 2012
quotequote all
V8 timing chain issues are not common and should not put you off buying one. Yes it is a major task if it does fail and the usual failures are from over revving the engine, something that is unlikely on an auto transmission.

You would have more to worry about with the nikasil issues and oil burning than the timing chain tensioners.

8Tech.

ShockDiamonds

Original Poster:

106 posts

179 months

Thursday 17th May 2012
quotequote all
Thx

Output Flange

17,053 posts

242 months

Friday 18th May 2012
quotequote all
The timing chain guides failed on my E39 540i at 162k miles.

Was quoted £1000 to fix - half of which was parts.

It didn't get fixed.

rm163603

656 posts

279 months

Friday 18th May 2012
quotequote all
I've read the problem is normally caused by a failure of a spring in the timing chain tensioner. This spring basically keeps the chain tensioned when there is no oil pressure during startup.

If the spring weakens or snaps the chain can flap around before the oil pressure has had a chance to push out the tensioner and tighten the chain. This can snap bits off the plastic chain guide as the chain slaps against it.

My e39 540i has 120K on it and I took the precaution of changing the tensioner. It's easy to change and costs about £40 IIRC.

My spring hadn't snapped but it was a lot shorter than the one in the new tensioner presumably due to age.

Just wanted to make sure people know it doesn't seem to be a random failure and there is a way of mitigating it up to a point.

ShockDiamonds

Original Poster:

106 posts

179 months

Friday 18th May 2012
quotequote all
Will bear that in mind, thanks.