comijg E39 rust
Discussion
Henry 145 said:
In Poole too and have rust on my E46...suggestions on where to go to get fixed?
I'm in Poole too, and had some bits done on mine. A few minor rust "bubbles" (two on the thin metal strip between the bumper and the boot lid, and a crusty stone-chip on the rear wing), plus some more serious looking bubbling on the driver's side front wing (which is a classic E46 rusting place!). I also paid extra for them to remove the wheel arch liners and give everything a good coating of stone chip protection underneath.Naming and shaming rules will stop me telling you where not to get it done, suffice to say I can't recommend the place who did it for me, because it had to go back after 5 days (yes 5 days) because the front wing had started bubbling again.
They had warned me that it might come back in time, but I was thinking it might last more than 5 days

Anyway, they have re-done the front wing for me - although since I now need to polish out some masking marks and over-spray from the drivers door, and remove some blue paint from the tyre, I assume they did it in a hurry

They did tell me that sometimes once the rust is "in the metal" its impossible to sort it permanently without cutting out the metal, and that I might be better off just buying a new front wing - which aren't that expensive, and just bolt off/on.
Where is the rust on yours?
evolution666 said:
blue oval, who did you use?
got a little on the wheels arches and the tailgate starting to appear so looking to get something sorted on this soon
cheers
http://www.racewrightautomotive.com/got a little on the wheels arches and the tailgate starting to appear so looking to get something sorted on this soon
cheers
He's just recently set up, he's been spraying cars since he was in his mid-teens apparently as his dad is in the trade, I was very, very pleased with the work that he did on mine

stevesuk said:
I'm in Poole too, and had some bits done on mine. A few minor rust "bubbles" (two on the thin metal strip between the bumper and the boot lid, and a crusty stone-chip on the rear wing), plus some more serious looking bubbling on the driver's side front wing (which is a classic E46 rusting place!). I also paid extra for them to remove the wheel arch liners and give everything a good coating of stone chip protection underneath.
Naming and shaming rules will stop me telling you where not to get it done, suffice to say I can't recommend the place who did it for me, because it had to go back after 5 days (yes 5 days) because the front wing had started bubbling again.
They had warned me that it might come back in time, but I was thinking it might last more than 5 days
Anyway, they have re-done the front wing for me - although since I now need to polish out some masking marks and over-spray from the drivers door, and remove some blue paint from the tyre, I assume they did it in a hurry
They did tell me that sometimes once the rust is "in the metal" its impossible to sort it permanently without cutting out the metal, and that I might be better off just buying a new front wing - which aren't that expensive, and just bolt off/on.
Where is the rust on yours?
Front wing passenger side and drivers door...bit of a pain the backside!Naming and shaming rules will stop me telling you where not to get it done, suffice to say I can't recommend the place who did it for me, because it had to go back after 5 days (yes 5 days) because the front wing had started bubbling again.
They had warned me that it might come back in time, but I was thinking it might last more than 5 days

Anyway, they have re-done the front wing for me - although since I now need to polish out some masking marks and over-spray from the drivers door, and remove some blue paint from the tyre, I assume they did it in a hurry

They did tell me that sometimes once the rust is "in the metal" its impossible to sort it permanently without cutting out the metal, and that I might be better off just buying a new front wing - which aren't that expensive, and just bolt off/on.
Where is the rust on yours?
Henry 145 said:
Front wing passenger side and drivers door...bit of a pain the backside!
I couldn't comment on the quality (or whether you're likely to get a perfect colour match), but there are plenty of sellers on eBay who will sell you a new pattern part front wing sprayed to your paint code colour.For example, this one
If mine goes again, I'm tempted to try it for the sake of £100 or so, since I think they are fitted with a few bolts, I guess anyone with a socket set could do the swap over?
sparks_E39 said:
It's a real b
d as it's a real eyesore on an otherwise good looking well kept 13 year old barge. I'll make sure it's done properly. Any recommendations in Poole will be very much appreciated. I'd rather have quality over cost, so don't mind paying the right amount. Cheers.
Was thinking of Bump at Tower Park
d as it's a real eyesore on an otherwise good looking well kept 13 year old barge. I'll make sure it's done properly. Any recommendations in Poole will be very much appreciated. I'd rather have quality over cost, so don't mind paying the right amount. Cheers.Henry 145 said:
Was thinking of Bump at Tower Park
Are they connected with the Poole Accident Repair centre (just round the corner in Tower Park)? Looks like they're owned by the same group from a quick Google.We have had two accident repairs carried out by Poole Accident Repair, and they were very good both times.
I guess "Bump" is probably their smart repair division?
Steve.
Gassing Station | BMW General | Top of Page | What's New | My Stuff



