1986 M535 - any good??
Discussion
Have just seen a 1986 M535i for sale here in Sydney. Apparently good history and in sound condition with 250,000 kms on the clock, the car is being sold through a dealer and has equivalent of 11 months tax/MOT.
I'll try to post link to the ad but using phone...
Go to carsales.com.au - there's only one M535 for sale at the mo. Metallic blue with cream leather
Any thoughts? A mad thing to go for at that age? Potential money pit???
I'll try to post link to the ad but using phone...
Go to carsales.com.au - there's only one M535 for sale at the mo. Metallic blue with cream leather
Any thoughts? A mad thing to go for at that age? Potential money pit???
Is it missing the centre part of the front splitter?
250k km is pretty leggy! The M30 engine is very strong, and perfectly capable of 150k miles, but you need to make sure it's not in need of the cams sorting by that sort of mileage.
Obviously, check for rust everywhere - inner and outer wings, around the screens and lights etc.
And it's over £4k, which would be very strong money over here - I think I'd expect to be paying £2-£2.5k tops for a car with that mileage and in need of some bodywork.
And if you drive it, check for wheel wobble at 55-60mph. Worn bushes are the usual culprit.
250k km is pretty leggy! The M30 engine is very strong, and perfectly capable of 150k miles, but you need to make sure it's not in need of the cams sorting by that sort of mileage.
Obviously, check for rust everywhere - inner and outer wings, around the screens and lights etc.
And it's over £4k, which would be very strong money over here - I think I'd expect to be paying £2-£2.5k tops for a car with that mileage and in need of some bodywork.
And if you drive it, check for wheel wobble at 55-60mph. Worn bushes are the usual culprit.
Gruber said:
Is it missing the centre part of the front splitter?
250k km is pretty leggy! The M30 engine is very strong, and perfectly capable of 150k miles, but you need to make sure it's not in need of the cams sorting by that sort of mileage.
Obviously, check for rust everywhere - inner and outer wings, around the screens and lights etc.
And it's over £4k, which would be very strong money over here - I think I'd expect to be paying £2-£2.5k tops for a car with that mileage and in need of some bodywork.
And if you drive it, check for wheel wobble at 55-60mph. Worn bushes are the usual culprit.
Thanks for the hints - rust not usually too much of an issue for cars delivered and living in Sydney but I always check. As for price, just part of living here - $7k neither top or bottom from what I've seen.250k km is pretty leggy! The M30 engine is very strong, and perfectly capable of 150k miles, but you need to make sure it's not in need of the cams sorting by that sort of mileage.
Obviously, check for rust everywhere - inner and outer wings, around the screens and lights etc.
And it's over £4k, which would be very strong money over here - I think I'd expect to be paying £2-£2.5k tops for a car with that mileage and in need of some bodywork.
And if you drive it, check for wheel wobble at 55-60mph. Worn bushes are the usual culprit.
When you say cams might need doing - they'll sound noisy? Or am I looking/listening for something else?
PomBstard said:
Any thoughts? A mad thing to go for at that age? Potential money pit???
I didn't really answer the questions, did I...It is a strong engine and reasonably straightfoward. And without the auto box, there's less to go wrong. Parts are readily available (over here at least!). And there's a strong international network of support.
They look great, are very practical, and with circa 220bhp still relatively brisk.
Rust is the big killer.
They share lots of parts with the 635csi. On my first 635 I needed headgasket replacing, waterpump, some brake-related stuff, but the second 635 needed very little because it had been better looked after previously. Best to buy one with plenty of evidence of recent service history.
They're old cars - stuff goes wrong. But they can be readily fixed without breaking the bank.
A couple of useful resources (the first is 6er related, but still helpful):
Buyers guide for 635: http://www.bigcoupe.com/buying/checklist.html (point 18 refers to the cam issue - they all sound a little "cammy", but if it's on its way out, it'll sound like its runing with no oil in).
And some useful stuff here: http://www.unixnerd.demon.co.uk/bmw.html
Buyers guide for 635: http://www.bigcoupe.com/buying/checklist.html (point 18 refers to the cam issue - they all sound a little "cammy", but if it's on its way out, it'll sound like its runing with no oil in).
And some useful stuff here: http://www.unixnerd.demon.co.uk/bmw.html
Gruber said:
I didn't really answer the questions, did I...
It is a strong engine and reasonably straightfoward. And without the auto box, there's less to go wrong. Parts are readily available (over here at least!). And there's a strong international network of support.
They look great, are very practical, and with circa 220bhp still relatively brisk.
Rust is the big killer.
They share lots of parts with the 635csi. On my first 635 I needed headgasket replacing, waterpump, some brake-related stuff, but the second 635 needed very little because it had been better looked after previously. Best to buy one with plenty of evidence of recent service history.
They're old cars - stuff goes wrong. But they can be readily fixed without breaking the bank.
That's great info, thanks. The wheel wobble bit makes sense- I drove a couple of 635CSis a few months ago and both suffered. Does this engine/gearbox combo give any particular signs all is not as it should be - noisy diff, rattly cams, etc?It is a strong engine and reasonably straightfoward. And without the auto box, there's less to go wrong. Parts are readily available (over here at least!). And there's a strong international network of support.
They look great, are very practical, and with circa 220bhp still relatively brisk.
Rust is the big killer.
They share lots of parts with the 635csi. On my first 635 I needed headgasket replacing, waterpump, some brake-related stuff, but the second 635 needed very little because it had been better looked after previously. Best to buy one with plenty of evidence of recent service history.
They're old cars - stuff goes wrong. But they can be readily fixed without breaking the bank.
Car would lead a relatively easy life with me - 8-10k kms a year tops, combination of urban, B-roads and motorway cruising.
I suspect that I'm going to need a wingman for the test drive cos I love the looks of the E24 and E28 and will quickly adorn the rose tints!
Get the box hot and listen for grumbling, highly likely, and think i bought the last set of bearings BMW had in stock in 1991 ! Its got 8 series wheels on, which is no bad thing, check dash for splits as well. I've had 5 of these,4 manual, 1 auto. Enjoyed all of them, had to build every box on the manual ones though, and it was expensive every time.
Thanks for the advice. Had a look at the car this afternoon and fairly easy to dismiss. Paintwork looked sad, 4 different tyre brands on show, not much history, and replacement engine 18 months ago. Engine wasn't running properly either - apparently since having engine bay cleaned. All panels straight and rust free though and interior worn but tear-free.
Made me realize I'd really like a good clean E28 or E24 of some sort
Made me realize I'd really like a good clean E28 or E24 of some sort
Gruber said:
And it's over £4k, which would be very strong money over here - I think I'd expect to be paying £2-£2.5k tops for a car with that mileage and in need of some bodywork.
Australia and the UK are two extremes. The UK has probably the most deflated used car market on the planet, Australia the most inflated. You'll pay $20k+ for a decent facelift E39 over there!Gassing Station | BMW General | Top of Page | What's New | My Stuff


