Anyone with road rashed E39 Pre facelight lights *LOOK*
Anyone with road rashed E39 Pre facelight lights *LOOK*
Author
Discussion

turbotoaster

Original Poster:

667 posts

203 months

Sunday 17th June 2012
quotequote all
Seems the market at the moment is great if your after a new set of headlights will angel eyes and all the bells and whistles.

But say you have a facelift vehicle and want to keep those lights, or just dont fancy buying aftermarket ones because they either look poor or worried about reliability.....or maybe like me your just cheap!


Anyway since my car has done 107k my headlights were looking a bit tired, loads of deep scratches and some mold inside that id never be able to get out.

Came across a company on ebay selling a set of new headlight covers for £85....thought oooo bargain thats a nice cheap way of renewing the front without taking away the OEM look, so i waited until they came back into stock.


Just by luck i spent some time browsing Amazon to see if there was any on there and come across these:

http://www.amazon.co.uk/FK-Automotive-Front-indica...

As you can see they are DEPO covers but for £30 for the pair its got to be worth a go.

So i ordered them from germany on monday night and they arrived in the UK on thursday morning.

Fitting was exactly the same as OEM ones and it definetly looks alot better and apart from the slightly darker tinted indicators(you can choose OEM colour instead) you would never know.

Here is a few pictures to show you them fitted.






Last one shows front tyre fitment aswell(305 wide)

So my recommondation is if you fancy a cheap way of cleaning up your front end this is a cheap and quick option

rassi

2,518 posts

282 months

Sunday 17th June 2012
quotequote all
Looks good - but have to ask about the 305 section front tires! The square set up is 275 section all round, 305 is huge! What rear section do you have?

4rephill

5,171 posts

209 months

Sunday 17th June 2012
quotequote all
rassi said:
Looks good - but have to ask about the 305 section front tires! The square set up is 275 section all round, 305 is huge! What rear section do you have?
It might be just the angle that the wheels at but that looks like an MOT failure to me as the wheel/tyre appears to be sticking out from the arch at the top.

BliarOut

72,863 posts

270 months

Sunday 17th June 2012
quotequote all
Do they come with seals as I need to sort my condensation and make a job of it biggrin

Got a full linky, that one is broke.

The Nur

9,168 posts

216 months

Sunday 17th June 2012
quotequote all
4rephill said:
It might be just the angle that the wheels at but that looks like an MOT failure to me as the wheel/tyre appears to be sticking out from the arch at the top.
I don't think the tyre sticks far out enough to be a fail, I see to remember something around a half an inch is acceptable? I may well be wrong.

Plus, I'm not sure if there isn't a little bit of lock on the steering.

roofer

5,136 posts

242 months

Sunday 17th June 2012
quotequote all
The Nur said:
I don't think the tyre sticks far out enough to be a fail, I see to remember something around a half an inch is acceptable? I may well be wrong.

Plus, I'm not sure if there isn't a little bit of lock on the steering.
I think you are allowed 25mm. Regardless, i would imagine it handles like a bag of st, lights look good though.

turbotoaster

Original Poster:

667 posts

203 months

Sunday 17th June 2012
quotequote all
The Nur said:
I don't think the tyre sticks far out enough to be a fail, I see to remember something around a half an inch is acceptable? I may well be wrong.

Plus, I'm not sure if there isn't a little bit of lock on the steering.
The rules from what i remember is that looking from above your not allowed to see the tread of the tyre, this is to stop spray in the rain going everywhere, for this vehicle its just in by about 1mm, but i havent set up the front camber yet as i want to do it on a hunter kit, i can add camber easily on my top mounts but i dont know what my static camber is currently yet.

Wheels are straight

roofer said:
I think you are allowed 25mm. Regardless, i would imagine it handles like a bag of st, lights look good though.
Just took it for a spin to a local roundabout where i used to get understeer if i entered with with a bit to much speed, well going in with the same speed(to see a comparison) it just turned it and i had to go alot faster to cause understeer, so an improvement.

rassi said:
Looks good - but have to ask about the 305 section front tires! The square set up is 275 section all round, 305 is huge! What rear section do you have?
Same front and rear, booked in at the end of the month to get the rears fully rolled, from factory M5s are only partially rolled

4rephill said:
It might be just the angle that the wheels at but that looks like an MOT failure to me as the wheel/tyre appears to be sticking out from the arch at the top.
As above

BliarOut said:
Do they come with seals as I need to sort my condensation and make a job of it biggrin


Got a full linky, that one is broke.
Ive forgot now, but in my head there were seals on the stock light units that the covers seal to, the pics on the advert are exactly what you get.

Ive just been out in the rain and they seem ok, so fingers crossed, if not ill get my sealant out

if the link doesnt work, go on amazon and type this exactly FK-Automotive Front indicator fit for BMW 5 Ser (Typ E39) Yr. 95-00

they have come down to £27 now!!

http://www.amazon.co.uk/FK-Automotive-Front-indica...