Sport / comfort button on new 5 series estate
Sport / comfort button on new 5 series estate
Author
Discussion

gpc911

Original Poster:

18 posts

221 months

Thursday 9th August 2012
quotequote all
I have recently taken delivery of a new 5 series estate and I noticed it has a Sport / Comfort button which I was not expecting. I did not opt for dynamic suspension and the car is a manual.

What is the difference between the Sport and Comfort modes? If it engine mapping or a different DSC setting. It also has an ECO PRO setting to but that seems to optimise everything to save fuel.

dave_s13

14,031 posts

300 months

Thursday 9th August 2012
quotequote all
Have you pressed it?

What happens?

smile

rfn

4,609 posts

238 months

Thursday 9th August 2012
quotequote all
Suspect it will sharpen up the throttle response, and probably the steering too. At least, that's what the Sport button does on a boggo MINI.

14-7

6,233 posts

222 months

Thursday 9th August 2012
quotequote all
It does sharpen up the throttle response and something else in the car (presumably suspension).

I drive 5 series at work (autos) and when at a standstill you can feel the car shake slightly when you engage sports mode as if it tightens up the suspension.

In the autos it also holds the gearbox one or two gears higher unless cruising at high speeds.


AOK

2,301 posts

197 months

Friday 10th August 2012
quotequote all
You are referring to Drive Performance Control, 4U2.

This is now standard on all F generation BMW's, whether or not you have opted for VDC / Adaptive M Suspension.

On cars without the VDC / Adaptive Suspension (aka 99% of cars out there), all the DPC does in Sport mode is sharpen up the throttle, delay gear changes and sharpen up steering on cars with servotronic.

It is only with VDC/adapt susp does it affect the suspension in any way at all.

If you have an M Sport it will also have Sport+. I may be wrong, but i think the SE's no longer have Sport+. Not that that's a problem... it is simply the 'Sport' mode with the addition of the DTC being enabled (which you can enable by pressing the button directly next to the DPC rocker).

Fyi, traction control is STILL ACTIVE when you press the DTC button. It just relaxes a little. In order to properly turn it off you have to hold the button down for 5 seconds. I may be wrong but I don't think that is mentioned in the manual