How to remove tailgate panel on X3?
How to remove tailgate panel on X3?
Author
Discussion

Thatch

Original Poster:

585 posts

271 months

Thursday 16th August 2012
quotequote all
I need to fix a couple of issues on my 2004 X3 (reg plate light wireing failure and intermittent wiper problems) and can't see how to get access!

Can anyone tell me how to remove the interior tailgate panel?

Many thanks for your help.

Andrew

E30M3SE

8,493 posts

227 months

Thursday 16th August 2012
quotequote all
Thee are screws inside the 2 molded recesses that you use to grab to close the tailgate.

On the bottom edge, either side of the latch there are 2x plastic rivets, push the centres of these then withdraw them,

There are 4 plastic poppers located on the inside of the panel below the rear screen that will release by gently pulling the panel once the above listed fixing have all been removed.

This is all IIRC.....

Thatch

Original Poster:

585 posts

271 months

Saturday 18th August 2012
quotequote all
Thanks Dev - just as you described!

Fun day stripping everything off the tailgate just to get to the number plate lights, but couldn't get to the broken wire! decided to add my own connection!

So its all working fine again.

Dont know how they manage to get 'ALL' the plastic poppers to line up when they build the car! Probably got about 50% to align!!!

4rephill

5,171 posts

209 months

Sunday 19th August 2012
quotequote all
I find this on-line BMW TIS site is quite useful for all manner of jobs: http://tis.spaghetticoder.org/

(You do have to search around the sections a bit sometime though)