E46 330Ci leaking something...
E46 330Ci leaking something...
Author
Discussion

a1burns

Original Poster:

198 posts

179 months

Monday 20th August 2012
quotequote all
After having my front bumper off to spray the lower grill black again I seem to have developed a leak...

It appears to be washer fluid (I do remember fiddling with the trim connected to the headlight washer) and im wondering if it could be this.

What im really looking for is some advice of anyone else who has experienced this as it appears to be dripping off the bottom of the radiator but that is being caught by the drip pan and there is a puddle on the floor, so I think that is just some of it leaking onto the rad and dripping down so im partially ruling out leaking rad (am yet to check coolant levels though...)

So what im saying is does anyone have any advice on what to check before ripping bits of trim/bumper off again to have a look, I've read online about taking out the headlight to look at the headlight washer but some people say this puts headlights out of alignment (they are Xenons if it makes a difference?) and some people say take the mudguard parts out and access from behind?

The Jolly Todger

2,744 posts

211 months

Monday 20th August 2012
quotequote all
I would just remove the bumper again and see if you can get a good look at what is leaking.

mini1380cc

2,949 posts

202 months

Monday 20th August 2012
quotequote all
If it is the headlight jets leaking you will see that the washer bottle level goes down just under the upper pump then stops leaking. It will also mean that you go through loads of fluid when cleaning your windows at night instead of the day.

Atlas 12v

362 posts

240 months

Tuesday 21st August 2012
quotequote all
Common issue on the E46, the connection between the pump and headlamp washers isn't water tight. I've had 2 with washers 1 ok and another leaked. Easiest option is to pull the tube from the pump and blank it off headlights don't get washed but you don't end up refilling your washer fluid every other day...
The washers only extend due to pressure from the pump so once the tubes blanked they will no longer operate.