E46 rear shock absorbers, Torque settings.
E46 rear shock absorbers, Torque settings.
Author
Discussion

rumple

Original Poster:

15,437 posts

182 months

Saturday 25th August 2012
quotequote all
Anyone know it, im thinking of that bottom bolt that was a right basterd to undo, by the way anyone doing this job in the future on a coupe, go in from the backseats, fold them sit on them pull the trim back, top mounts are right there.

E30M3SE

8,493 posts

227 months

Saturday 25th August 2012
quotequote all
Rear shock to trailing arm is 44 lb/ft.
Shock to top mount is 10lb/ft.
Top mount to body is 21lb/ft.


Edited by E30M3SE on Saturday 25th August 10:16

rumple

Original Poster:

15,437 posts

182 months

Saturday 25th August 2012
quotequote all
Thanks.

buggalugs

9,296 posts

268 months

Sunday 26th August 2012
quotequote all
Takes longer disassembling all the frikking trim than changing the shock in a touring!

4rephill

5,171 posts

209 months

Sunday 26th August 2012
quotequote all
E30M3SE said:
Rear shock to trailing arm is 44 lb/ft.
Are you sure on that one?

According to the BMW TIS:

http://tis.spaghetticoder.org/s/view.pl?1/04/44/34 :

http://tis.spaghetticoder.org/s/view.pl?1/03/70/51 ) 1AZ: Shock absorber to trailing arm/ wheel carrier/ swinging arm/ support arm/ control arm (tighten in normal position): E36, E46, E83, E85, E86 = 100 Nm (73 lb/ft)

rumple

Original Poster:

15,437 posts

182 months

Sunday 26th August 2012
quotequote all
4rephill said:
E30M3SE said:
Rear shock to trailing arm is 44 lb/ft.
Are you sure on that one?

According to the BMW TIS:

http://tis.spaghetticoder.org/s/view.pl?1/04/44/34 :

http://tis.spaghetticoder.org/s/view.pl?1/03/70/51 ) 1AZ: Shock absorber to trailing arm/ wheel carrier/ swinging arm/ support arm/ control arm (tighten in normal position): E36, E46, E83, E85, E86 = 100 Nm (73 lb/ft)
Im gonna crawl under and do it to that, it was a lot tighter than 44 lb/ft when i undid it.

4rephill

5,171 posts

209 months

Sunday 26th August 2012
quotequote all
rumple said:
Im gonna crawl under and do it to that, it was a lot tighter than 44 lb/ft when i undid it.
That was My main concern - I didn't want to risk you having it come loose!

This site also quotes nearer to the BMW TIS sites torque setting: http://www.dvatp.com/bmw/diy/shocks_and_springs/ (81 ft*lbs)
(Under the bottom right hand picture of the lower shock assembly)

The BMW TIS site can take a bit of digging around to find what you need (and some sections aren't covered at all for some reason), but it's a good reference tool.

rumple

Original Poster:

15,437 posts

182 months

Sunday 26th August 2012
quotequote all
4rephill said:
rumple said:
Im gonna crawl under and do it to that, it was a lot tighter than 44 lb/ft when i undid it.
That was My main concern - I didn't want to risk you having it come loose!

This site also quotes nearer to the BMW TIS sites torque setting: http://www.dvatp.com/bmw/diy/shocks_and_springs/ (81 ft*lbs)
(Under the bottom right hand picture of the lower shock assembly)

The BMW TIS site can take a bit of digging around to find what you need (and some sections aren't covered at all for some reason), but it's a good reference tool.
Mucho gracios, spent the day rewiring the drivers memory seat today, only thing ive really had trouble with, its like the loom is brittle and breaking up, sore knees now, and not in a good way.moan

4rephill

5,171 posts

209 months

Sunday 26th August 2012
quotequote all
rumple said:
Mucho gracios, spent the day rewiring the drivers memory seat today, only thing ive really had trouble with, its like the loom is brittle and breaking up, sore knees now, and not in a good way.moan
Sore knees? - Been there! - done that! irked

(These days, to add to the sore knees, after a good long session of fixing something whilst kneeling down [usually on lumpy tarmac or concrete rolleyes ], when I try to stand up I find My legs don't want to straighten out!)


My current project is trying to track an annoying trim rattle in the passengers foot-well:

So far - No joy! banghead