Non-starting E39
Discussion
Help!
Long story, short. Got back from holiday to find my battery flat on E39, this was due to alarm issues night before going away and probably a tired battery.
I tried to jump start the car from the block but without success and then tried the battery end also without success.
New battery fitted (old one wouldn't hold charge so definitely faulty) and now car will turn but not start on valet key and is dead ignition wise (doesn't crank or start) on main key (only have these two).
Having hooked up Scanner and PA Soft to car and after much code clearing am down to these:
EWS
Fault present - 02 [002] Wrong changing code, key 0
DME
Fault not present - 29 [039] EWS3.3, Anti-Tamper protection
Fault present 94 [148] EWS Interface DME - EWS
My assumption (!) is that my rolling code is out of synch stopping car turning/firing - does that seem correct?
If so how do I resolve? Can I do it via PA soft or is it an Indoy/Dealer fix?
I'd be more happy if I could drive the car to the dealer/Indy but of course it's stuck on my drive!
Any help gratefully appreciated!
Thanks
Colin
Long story, short. Got back from holiday to find my battery flat on E39, this was due to alarm issues night before going away and probably a tired battery.
I tried to jump start the car from the block but without success and then tried the battery end also without success.
New battery fitted (old one wouldn't hold charge so definitely faulty) and now car will turn but not start on valet key and is dead ignition wise (doesn't crank or start) on main key (only have these two).
Having hooked up Scanner and PA Soft to car and after much code clearing am down to these:
EWS
Fault present - 02 [002] Wrong changing code, key 0
DME
Fault not present - 29 [039] EWS3.3, Anti-Tamper protection
Fault present 94 [148] EWS Interface DME - EWS
My assumption (!) is that my rolling code is out of synch stopping car turning/firing - does that seem correct?
If so how do I resolve? Can I do it via PA soft or is it an Indoy/Dealer fix?
I'd be more happy if I could drive the car to the dealer/Indy but of course it's stuck on my drive!
Any help gratefully appreciated!
Thanks
Colin
I'm no expert, but mine has done similar: it's possible your main key has discharged, so the car won't recognise it? I'd begin by disconnecting the main battery for 20 mins or so, the ECU should then reset to default values, then see if it'll start on the valet key once it's reconnected. If it goes, try the main, if it doesn't like the main, there's a way of charging it using an electric toothbrush or similar (ie an induction charger of some sort), although you might get some life just leaving it in the ignition for a little while. The main battery will need to be fully charged, though, e39s hate dodgy batteries...
MarkwG said:
I'm no expert, but mine has done similar: it's possible your main key has discharged, so the car won't recognise it? I'd begin by disconnecting the main battery for 20 mins or so, the ECU should then reset to default values, then see if it'll start on the valet key once it's reconnected. If it goes, try the main, if it doesn't like the main, there's a way of charging it using an electric toothbrush or similar (ie an induction charger of some sort), although you might get some life just leaving it in the ignition for a little while. The main battery will need to be fully charged, though, e39s hate dodgy batteries...
Thanks, just read this post and it's similar to what I did earlier tonight which got it running. Put "valet" key in and cleared down all codes then disconnected battery for an hour to "empty" memory. Started ok on valet key after that. Daren't try main key though, will order a new one from BMW then see what that does! If I'm brave then might just try to trick to start it on valet then start again within 10 seconds on main to see if that will help main charge up. Main is fine for working central locking though.
If it's powering the locking, the cars recognising it, then - sounds like the rechargable in the key has discharged too far for the immobiliser to recognise it. You mighth find the mains got enough in it to work, now, if the car itself is OK. The new key will be one of the blanks BMW keep, worth having, they are pricey, though... I alternate key use, these days, to keep the charge up.
Gassing Station | BMW General | Top of Page | What's New | My Stuff


