Sumps
Author
Discussion

Output Flange

Original Poster:

17,053 posts

242 months

Thursday 13th September 2012
quotequote all
According to RealOEM, the p/n for a sump gasket for an E36 M3 Evo is the same as for all M50, M52, S50, M54 and S54 engines.

Which in turn suggests that the sump from one will bolt up to any other.

Anyone know better?

buggalugs

9,297 posts

268 months

Thursday 13th September 2012
quotequote all
Output Flange said:
According to RealOEM, the p/n for a sump gasket for an E36 M3 Evo is the same as for all M50, M52, S50, M54 and S54 engines.

Which in turn suggests that the sump from one will bolt up to any other.

Anyone know better?
The oil pickups differ, some sumps have the bowl at the front, rear etc. and the oil pump inlet must be changed to match the new sump. Some have different windage arrangements also but these can be grinder'd as appropriate.

Output Flange

Original Poster:

17,053 posts

242 months

Thursday 13th September 2012
quotequote all
buggalugs said:
Some have different windage arrangements also but these can be grinder'd as appropriate.
The rest of what you've said I think I know, but I'm not sure what you mean by this?

buggalugs

9,297 posts

268 months

Friday 14th September 2012
quotequote all
Output Flange said:
buggalugs said:
Some have different windage arrangements also but these can be grinder'd as appropriate.
The rest of what you've said I think I know, but I'm not sure what you mean by this?
From reading a few build threads of people putting engines in E30's which involve sump swaps, some sumps have a tin windage tray in them and on some engines it's attached to the block, so sometimes people have to loose one of the trays to avoid having 2 when swapping sumps around.

i.e. this tin tray thing on the left here -


could be in the sump instead

This was a pic of the M50b25 non-vanos, I put an E34 sump on it and had to change the oil pickup and dipstick tube but no windage tray issues on this one luckily. IIRC there was a little bracket thing to stay the old longer oil pickup that hit the new sump but I just snipped that off rather than disturb the main cap bolts that were securing it.

The two sumps