e46(330ci) Fault Code Reading Question
Discussion
Hi,
So the other morning my ABS/DSC/Brake Light came up on the dash so I started "googling" to get an idea of possible faults. Ordered a code reader and fired it up with the laptop this afternoon, sure enough 1 fault code which is "P0500 - Vehicle Speed Sensor Malfunction". Now my reader has an option to clear codes so I thought I would do this and see if it reoccurred (apparently this fault can be intermittent), the code cleared successfully (and so far hasn't reappeared) but the lights on my dash still remain, is this normal?
Do I need to do something else to reset the lights or is this in itself indicative that the fault remains? Probably going to end up taking it to a garage Tuesday anyway but I'd rather avoid the 45min journey each way if I can self diagnose or confirm it is just intermittent.
Thanks,
Ben
So the other morning my ABS/DSC/Brake Light came up on the dash so I started "googling" to get an idea of possible faults. Ordered a code reader and fired it up with the laptop this afternoon, sure enough 1 fault code which is "P0500 - Vehicle Speed Sensor Malfunction". Now my reader has an option to clear codes so I thought I would do this and see if it reoccurred (apparently this fault can be intermittent), the code cleared successfully (and so far hasn't reappeared) but the lights on my dash still remain, is this normal?
Do I need to do something else to reset the lights or is this in itself indicative that the fault remains? Probably going to end up taking it to a garage Tuesday anyway but I'd rather avoid the 45min journey each way if I can self diagnose or confirm it is just intermittent.
Thanks,
Ben
Gassing Station | BMW General | Top of Page | What's New | My Stuff


