E93 Guru needed
E93 Guru needed
Author
Discussion

DonkeyApple

Original Poster:

70,912 posts

200 months

Tuesday 25th September 2012
quotequote all
Some odd questions but it's all about using the front seats of an E93 in another car. smile

The reason for looking at these seats is that they contain the seat belt rather than using a belt mounted from the B pillar.

Question 1: I'm not concerned about the colour of the leather as this will bee changed in a retrim. However, I'm trying to establish what the colour code options were on the plastic side facia that houses the belt and swing mechanism. So far I've seen black, white and grey but it would be good of it was ever done in tan or any darker brown?

Question 2: is it true that the ECU for these seats is all self contained so all you need to do is give them power and all their functions work?

Question 3: are all electric seats to the same level of functionality with the exception of the assumption that heated seats and memory functions were probably options?

Question 4: am I right that one button electrically moves the seat forward and tilts for access to the rear?

Thanks.

Tim.

TheEnd

15,370 posts

219 months

Tuesday 25th September 2012
quotequote all
I can tell you that question 2 isn't exactly right.
They do have ECUs in them, but they will want to be recognised by the rest of the car.

Ideally they would need to be fitted, and then the car programmed for a seat retrofit.

DonkeyApple

Original Poster:

70,912 posts

200 months

Tuesday 25th September 2012
quotequote all
TheEnd said:
I can tell you that question 2 isn't exactly right.
They do have ECUs in them, but they will want to be recognised by the rest of the car.

Ideally they would need to be fitted, and then the car programmed for a seat retrofit.
The car in question has no electrics as it's a 40 year old Rangie. wink

I know that someone has done this already and apparently the key was that the control unit was totally stand alone and that the seats were from a 3 series.

The only model which seems to have the integrated seat belt is the more recent cabrios and coupes.

TheEnd

15,370 posts

219 months

Tuesday 25th September 2012
quotequote all
Ah... so you won't be connecting any of the CAN bus and data links...

I guess you can only try it and see.

http://wds.spaghetticoder.org/en/e8790/Complete_ve...

That will bring you to some wiring diagrams so you can get an idea of what you will need to connect.

DonkeyApple

Original Poster:

70,912 posts

200 months

Tuesday 25th September 2012
quotequote all
TheEnd said:
Ah... so you won't be connecting any of the CAN bus and data links...

I guess you can only try it and see.

http://wds.spaghetticoder.org/en/e8790/Complete_ve...

That will bring you to some wiring diagrams so you can get an idea of what you will need to connect.
Thanks. Hopefully I can make some reasoning out of that. wink

The motor functions should be self contained but I imagine any function controlled from the dash such as heating will be messy?

TheEnd

15,370 posts

219 months

Tuesday 25th September 2012
quotequote all
Seat heating could be a data signal, unless the button is on the seat.
Another possible problem is if they are folding coupe seats.

The folding seats have a sensor to say if they are locked in position or not, and it passes that info onto the rest of the car electronics. If it is self contained, you're laughing, if it needs to get an OK signal back they could refuse to move.

There will be data links to activate any of the features from the OBD port normally, for integration like comfort access where the seat would move back when you unlock the car from the fob.

All it needs is a go/no go line of code somewhere in the ECU, and if it doesn't get a thumbs up from a missing module, it could refuse to move at all.

DonkeyApple

Original Poster:

70,912 posts

200 months

Tuesday 25th September 2012
quotequote all
Thanks. Nothing is rarely simple. smile

But I guess all those can be given a permanent override to resolve.

DonkeyApple

Original Poster:

70,912 posts

200 months

Tuesday 2nd October 2012
quotequote all
TheEnd said:
Ah... so you won't be connecting any of the CAN bus and data links...

I guess you can only try it and see.

http://wds.spaghetticoder.org/en/e8790/Complete_ve...

That will bring you to some wiring diagrams so you can get an idea of what you will need to connect.
I've spent some time today trying to make sense of the diagrams biggrin

bolide

582 posts

285 months

Tuesday 2nd October 2012
quotequote all
If this doesn't work out it's possible to fit Recaros to original Range Rovers. From memory the belt mounts are on the B pillar like other cars

A set of period Recaros trimmed to suit would work very well... Plenty for sale in Germany but prices can be very steep

Nick Froome

DonkeyApple

Original Poster:

70,912 posts

200 months

Tuesday 2nd October 2012
quotequote all
bolide said:
If this doesn't work out it's possible to fit Recaros to original Range Rovers. From memory the belt mounts are on the B pillar like other cars

A set of period Recaros trimmed to suit would work very well... Plenty for sale in Germany but prices can be very steep

Nick Froome
Thanks. Yes, 70s Recaros were where I originally started looking. They were used in the Schuler conversions among others.

But, they are near impossible to source. Plus, they are very heavy and getting a single action tilt and slide isn't possible.