E45 cd changer help
E45 cd changer help
Author
Discussion

nickcowen

Original Poster:

625 posts

194 months

Sunday 30th September 2012
quotequote all
I just removed the cd changer cartridge to change the CDs in it, put it back in and while the stereo started to load/check the CDs one had become stuck half in half out. Is there a way to reset the cd changer to spit the cd back out or am I going to have to take it apart to remove it?

Thanks for any help

E30M3SE

8,493 posts

227 months

Monday 1st October 2012
quotequote all
Try a 'down power' in the first instance, pull fuses 7 & 41, leave them out for 5 minutes or so refit.

SouthernBoy

4,121 posts

239 months

Monday 1st October 2012
quotequote all
With the power on, smack it firmly on the top of the changer. Works for me in my E46 on the occasional time it has become 'stuck'.




nickcowen

Original Poster:

625 posts

194 months

Saturday 6th October 2012
quotequote all
E30M3SE said:
Try a 'down power' in the first instance, pull fuses 7 & 41, leave them out for 5 minutes or so refit.
Sorry for not replying sooner had a busy week.
Will removing the fuses not prompt for the radio code to be input like when the batter is disconnected? Or dose this not apply

nickcowen

Original Poster:

625 posts

194 months

Saturday 6th October 2012
quotequote all
SouthernBoy said:
With the power on, smack it firmly on the top of the changer. Works for me in my E46 on the occasional time it has become 'stuck'.
They'd hitting it, didn't work. Took it half apart and couldn't free it. When you press the eject button it dose make a noise the first time but then nothing

to3m

1,228 posts

201 months

Sunday 7th October 2012
quotequote all
Apply hammer to the actual changer unit, the part that you take out. You may have to hit it two or three times. If it doesn't eject of its own accord, try pressing the button. See this thread:

http://www.pistonheads.com/gassing/topic.asp?h=0&a...

This has happened to me 3 or 4 times now...

E30M3SE

8,493 posts

227 months

Monday 8th October 2012
quotequote all
nickcowen said:
E30M3SE said:
Try a 'down power' in the first instance, pull fuses 7 & 41, leave them out for 5 minutes or so refit.
Sorry for not replying sooner had a busy week.
Will removing the fuses not prompt for the radio code to be input like when the batter is disconnected? Or dose this not apply
Radio aren't coded, afaik.

nickcowen

Original Poster:

625 posts

194 months

Monday 8th October 2012
quotequote all
E30M3SE said:
Radio aren't coded, afaik.
Thanks ill try that next then. And if all fails I'll get the hammer out.

nickcowen

Original Poster:

625 posts

194 months

Monday 8th October 2012
quotequote all
Just removed fuse 7&41 replaced them and the magazine popped out, happy days. Did get a spark from fuse 40 when putting fuse 41 back in, hope that wasn't important :/