E36 Stereo Wiring Harness?
E36 Stereo Wiring Harness?
Author
Discussion

MrWest90

Original Poster:

62 posts

225 months

Monday 1st October 2012
quotequote all
I have recently purchased an E36 as my daily driver, which has come pre loaded with a Pioneer tape deck. I have a replacement Pioneer CD player to take it's place but I am having a little trouble trying to find the correct wiring harness to go with it.

Please see the pictures below which shows a 12 pin long block which is coming from the car. If anyone has any idea what lead I need to go with this to get it running it would be much appreciated?

I am hoping someone has had a similar issue!






MrWest90

Original Poster:

62 posts

225 months

Monday 1st October 2012
quotequote all
Apologies I meant 13 pin there and not 12

MarkwG

5,970 posts

220 months

Monday 1st October 2012
quotequote all
That looks after market to me, there are bullet connectors beyond it: I don't think you'll find a straight harness in Halfords etc to fit it. Mine came with a Pioneer from the factory, but the connector blocks where different to that.

E30M3SE

8,493 posts

227 months

Tuesday 2nd October 2012
quotequote all
You won't find anything that adapts the white plug as that is a Pioneer plug that goes directly into the back of the h/u. Pull the wires coming out of the dash to see what you find there, if your lucky the original BMW plug is still there and not been butchered.

You'll then need a BMW to iso plug.

http://www.ebay.co.uk/itm/PC2-05-4-BMW-3-5-7-8-Ser...

MrWest90

Original Poster:

62 posts

225 months

Tuesday 2nd October 2012
quotequote all
Success! smile

Thank you for the feedback guys, managed to located the BMW block deep behind the dashboard.

I've now purchased the correct harness, but it doesn't seem to be saving the settings on the stereo.

Any ideas for a fix for that would be much appreciated?

Many thanks

Pickled Piper

6,452 posts

266 months

Tuesday 2nd October 2012
quotequote all
It will be something to do with having a permanent live vs an ignition switched live. You will probably just need to swap these over.

pp

E30M3SE

8,493 posts

227 months

Wednesday 3rd October 2012
quotequote all
As above.

As the BMW plug is in tact, swap the red and yellow cable on the h/u wiring harness, they usualy have intermetiate links. If your h/u has a iso plug directly into the back then snip the red and yellow on the harness so red goes to yellow and yellow goes to red.

MarkwG

5,970 posts

220 months

Wednesday 3rd October 2012
quotequote all
Or you might be able to swap the fuse connectors over!

MrWest90

Original Poster:

62 posts

225 months

Wednesday 3rd October 2012
quotequote all
Thanks for your input again guys, I'm not the best technical minded person with electrical wiring and so forth.

The battery permanant wire was going to the battery ignition by the looks of things which worked fine on my old car. Switched them back over and all is well again. biggrin