SWIRL FLAP QUESTION
SWIRL FLAP QUESTION
Author
Discussion

ROLFSSEN

Original Poster:

96 posts

171 months

Saturday 6th October 2012
quotequote all
Hi,

I've read various bits & bobs about swirl flap problems - but my brain needs refreshing, now I think it might be relevant to me - so any advice you could give would be much appreciated.

I've got an E60 535D - it's a 55-plate pre-LCI, is this car (now it's done 85,000 miles) at risk of failure of these flaps? The car's doing about 3000 miles per month...

If so, what should I do?

Rolf


Broaders

85 posts

251 months

Sunday 7th October 2012
quotequote all
I believe you have swirl flaps but please do your research and double check.

I would advise fitting blanking plates made by PMW in Chelmsford. They will mail them to you if you are no where near. Local garage should charge £150-200. Much cheaper than a new engine!

Richard

ROLFSSEN

Original Poster:

96 posts

171 months

Monday 8th October 2012
quotequote all
Thanks Richard!

StuB

6,695 posts

270 months

Tuesday 9th October 2012
quotequote all
I'm fairly sure you will have swirl flaps and you can change the manifold to a later design or get them removed/blanked to prevent catastrophic faulre.

My E60 530D cost me >£4.5k to put right after we had a 'minor' failure, which was a drop in power/performance.

ROLFSSEN

Original Poster:

96 posts

171 months

Tuesday 9th October 2012
quotequote all
Ouch ! £4.5k! The car's only worth about £8k!

Is the problem to do with carbon build up? Is it still a problem if the car is used hard week in week out, or does that make the problem more likely?

StuB

6,695 posts

270 months

Tuesday 9th October 2012
quotequote all
Metal fatigue. Sold the car last year for 5k to trade.

Mark34bn

827 posts

208 months

Tuesday 9th October 2012
quotequote all
Looking at doing this myself now we have a 330d (if we keep it past the end of the week!)

http://www.bmwland.co.uk/swirl_flaps_bmw/swirl_fla...

93Jay

3,383 posts

195 months

Tuesday 9th October 2012
quotequote all
We had a 56 535d Pre LCI, which had the Swirl flaps removed with PW Blanking plates fitted by a BMW specialist for about ~£140 I believe.

Neil.D

2,878 posts

237 months

Tuesday 9th October 2012
quotequote all
Whilst the risk of failure is low compared to the older, Pre 2004 design, it's not low enough. I had mine removed soon after buying.

My opinion is to get them out asap.