Laser Tracking/KDS
Discussion
I picked my 320d up last week which had been fully laser tracked by an independent on the 4th. I dropped my car off at BMW yesterday to have some different alloys (second hand) fitted. I asked BMW to do another laser alignment for good measure. BMW are saying one of the front wheels is 2 degrees out and they cant get it to align and want to have a look at my front suspension maybe change some parts. How can this be after it was fully alligned less than a week ago all be it on different wheels? is the BMW KDS system different to other laser alignment machines? BMW said they compare the set-up to when the car was originally built and that's what they go off
It wasn't aligned correctly by the indie either due to operator error or calibration, the 'new' wheels are causing an issue, or 1 of them is. Or BMW dealer is just trying it on, however if there is play in a wishbone/thrust/ arm balljoint, steering rod/rod end or bush on that front side that could well account for the issue.
Easy way to rule out the wheels is to put the 'old' wheels back on in the same positions and recheck.
ETA; did the indie give you a print out of the setting before and after?
Easy way to rule out the wheels is to put the 'old' wheels back on in the same positions and recheck.
ETA; did the indie give you a print out of the setting before and after?
Edited by E30M3SE on Thursday 11th October 14:28
Gassing Station | BMW General | Top of Page | What's New | My Stuff


