X5 Engine Mounting
Discussion
I have an E53 X5 petrol. Had a major problem with one side of the engine leaning over onto drive shaft. The garage lowered the engine block to find that 3 of the bolts had come loose from the engine block bracket and one had sheared off completely. They have heli coiled 3 of them.
The finished job is good and drives fine but would appreciate any expert opinions on how long can the repair last?
The finished job is good and drives fine but would appreciate any expert opinions on how long can the repair last?
As an ex aerospace engineer (engines & airframes), provided they used good quality helicoils and bolts of the appropriate strength properties (high shear) the repair could be as good if not better than OE. If you trust the garage to not use plain steel bolts & cheap self locking nuts.....
I would recommend you make a point of checking after a few miles and then ask at each service interval for an quick inspection. This has to be quite an unusual failure, but may indicate some previous accident damage to your car, which has weakened the mounts/bolts? Engine mountings/bolts should not fail!
I would recommend you make a point of checking after a few miles and then ask at each service interval for an quick inspection. This has to be quite an unusual failure, but may indicate some previous accident damage to your car, which has weakened the mounts/bolts? Engine mountings/bolts should not fail!
Gassing Station | BMW General | Top of Page | What's New | My Stuff


