2002 E46 330ci - Suggestions Please...
Discussion
Hi All,
Right, my first post..
I have just brought a 2002 E46 330ci MSport - 48k miles - BMW FSH (front bushes replaced and all proper inspections etc etc). I have always loved the pre-facelift E46 cars as personally I think the styling was far more aggressive and purposeful than the later facelift versions. So, to all ends even by my pathetic Bimmer knowledge it's a tidy car.
Now, I have read many a post discussing the 330ci vs M3 but I wish to take another angle; what you suggest could make this car a truly smart example? Perhaps its best if I break this down:
Engine - M54 seems very smooth as you'd expect but lacking in low rev torque. I've heard lots about chipping but also heard some horror stories... Suggestions please. I believe that the standard produced by BMW was very high to start with but if any one has any suggestions to pull a few more BHP and better torque without risking integrity or crushing MPG I'd be interested.
Handling - Standard suspension seems pretty nice and let's face it this is not a throughbred sports car so one cannot expect Caterham/MX5 - like responsiveness on an open country road. Weight is obviously an issue. I'm considering a strut brace - will there be any real gain on the road or just on the track? What about polyurethane bushes?
Other - Purely cosmetic but I want to hook the iPod up to the stero. Is there a kit or supplier that can do this without the £200+ BMW dealer price?
All thoughts welcome.
Right, my first post..
I have just brought a 2002 E46 330ci MSport - 48k miles - BMW FSH (front bushes replaced and all proper inspections etc etc). I have always loved the pre-facelift E46 cars as personally I think the styling was far more aggressive and purposeful than the later facelift versions. So, to all ends even by my pathetic Bimmer knowledge it's a tidy car.
Now, I have read many a post discussing the 330ci vs M3 but I wish to take another angle; what you suggest could make this car a truly smart example? Perhaps its best if I break this down:
Engine - M54 seems very smooth as you'd expect but lacking in low rev torque. I've heard lots about chipping but also heard some horror stories... Suggestions please. I believe that the standard produced by BMW was very high to start with but if any one has any suggestions to pull a few more BHP and better torque without risking integrity or crushing MPG I'd be interested.
Handling - Standard suspension seems pretty nice and let's face it this is not a throughbred sports car so one cannot expect Caterham/MX5 - like responsiveness on an open country road. Weight is obviously an issue. I'm considering a strut brace - will there be any real gain on the road or just on the track? What about polyurethane bushes?
Other - Purely cosmetic but I want to hook the iPod up to the stero. Is there a kit or supplier that can do this without the £200+ BMW dealer price?
All thoughts welcome.
Have a search for VANOS as essentially the seals perish even at low mileages leaving you with reduced effectiveness valve timing up to about 3krpm. You can even buy a reconditioned unit from the states & just swap them over but this should help with low end torque and is on my to do list.
Regarding handling I bought the strut brace you find in an M3 and to be honest the difference is small. On previous cars I've found LOWER front strut braces to have a much bigger effect but I don't think you can get one for the 330.
I would suggest keeping the standard suspension and buying stiffer ARBs as this will trade less ride comfort than stiffer springs & dampers whilst giving much improved roll in the corners. Again, this is on my to do list...
Regarding handling I bought the strut brace you find in an M3 and to be honest the difference is small. On previous cars I've found LOWER front strut braces to have a much bigger effect but I don't think you can get one for the 330.
I would suggest keeping the standard suspension and buying stiffer ARBs as this will trade less ride comfort than stiffer springs & dampers whilst giving much improved roll in the corners. Again, this is on my to do list...
I have had a good look at http://forum.roadfly.com/threads/11027162 and a outfit called Beisan Systems in the US who seem to do a good kit for this. Has anyone done this mod/can recommend a good UK specalist to do the work?
Don't really wanna go ripping the engine apart to realise I'm up s@#t creek without a paddle...
Don't really wanna go ripping the engine apart to realise I'm up s@#t creek without a paddle...
Good tyres are a must, wrong ones will make it tramline, a Frei.d had his chipped and he thought it made it a much better drive, no big power gains though, CSL wheels look good, if you fit M3 wheels though get 4 fronts, I always liked the look of the CSL boot spoiler, don't how ever try to make it look like an M3 because it won't, golf tee mod and removeing under bonnet insulation make it sound better take 5 mins and are reversible, I agree with you about the looks, I really think they ruined the car with the facelift, any chance of some pics.
Gassing Station | BMW General | Top of Page | What's New | My Stuff



