8 series door replacement/aligning
8 series door replacement/aligning
Author
Discussion

pits

Original Poster:

6,704 posts

221 months

Monday 1st February 2016
quotequote all
Possibly one for 8Tech, but does anyone know how to align an 8 series door? Ours got smashed a while back and now on a mission to get it back on the road for March in a proper stealth project birthday present to the old man, but I just can't find any info on it.
Need to get it done as it just looks so sad sat in the garage with a huge dent down the side of it and faded paint all over frown

Vixpy1

42,699 posts

295 months

Monday 1st February 2016
quotequote all
If you can then best to get the car to Gerry, no one is better with E31's

pits

Original Poster:

6,704 posts

221 months

Monday 1st February 2016
quotequote all
Can't get the car anywhere, on such a strict schedule for this, need to get it out the garage
Bodywork fixed
Painted
Sport kit added
Wheels
Service
Mot
A week and a bit for all that, as it currently sits, but with a new door



Edit: stupid phone posted it before I had finished.
Ideally I would take it to him, as from what I've heard he is the man in the UK for the 8, I just can't see how I can budget that into m6 already tight budget, it's had a 4 year layup so I'm expecting problems as it is

8Tech

2,222 posts

229 months

Tuesday 2nd February 2016
quotequote all
Hi,

A week is too tight for all of that work. You can expect a day for a full service although an oil service can be done in a couple of hours maximum. (Thats an oil SERVICE, as opposed to an oil change, big difference!)
You could replace the door but it will need stripping out to pull the wiring through the door shut. Even my bodyshop would want the car for a week to repair that rear quarter and repaint the side of the car.
An MOT is another hour or so of your time, plus to and fro from the station.
The sports kit requires the removal of the complete nosecone assembly and all the associated broken plastic clips that go with that, and to properly install the rear valance, the rear bumper needs removal. To install the mirrors, you need to remove the door panel on the drivers side also to get to the wiring, you will be doing that anyway replacing the door on the passenger side.
I presume the body kit will then need prep and paint too?
My guys would advise me where to put the car and it's door if I asked them to do that in a week, and it would not be in the workshop!!!
Don't forget too this all assumes it passees the MOT without issues.
You dont need to consider and time involved in the wheels because they will be coming off during the service anyway.
Good luck, and if you need a door, give me a call.

8Tech.

pits

Original Poster:

6,704 posts

221 months

Tuesday 2nd February 2016
quotequote all
8Tech said:
Hi,

A week is too tight for all of that work. You can expect a day for a full service although an oil service can be done in a couple of hours maximum. (Thats an oil SERVICE, as opposed to an oil change, big difference!)
You could replace the door but it will need stripping out to pull the wiring through the door shut. Even my bodyshop would want the car for a week to repair that rear quarter and repaint the side of the car.
An MOT is another hour or so of your time, plus to and fro from the station.
The sports kit requires the removal of the complete nosecone assembly and all the associated broken plastic clips that go with that, and to properly install the rear valance, the rear bumper needs removal. To install the mirrors, you need to remove the door panel on the drivers side also to get to the wiring, you will be doing that anyway replacing the door on the passenger side.
I presume the body kit will then need prep and paint too?
My guys would advise me where to put the car and it's door if I asked them to do that in a week, and it would not be in the workshop!!!
Don't forget too this all assumes it passees the MOT without issues.
You dont need to consider and time involved in the wheels because they will be coming off during the service anyway.
Good luck, and if you need a door, give me a call.

8Tech.
It does seem like a massive task I do agree, the plan is a lot more thought out time wise then what I've put up here.
The next two/three weeks I will be doing any servicing work I can in the day, book time off, tow car out garage, get oil changed, fuel drained, fuel filter changed, air filter etc, this will help alleviate a lot of the pressure.

Wheels and body kit are already out getting prep'd as we speak, managed to sneak them out, so hopefully it is a case of get it in, nose cone off, check all the fitment, prime the nose cone and paint, same with rear bumper, Mirrors aren't being fitted purely because my old man just doesn't like the look of them, even on a sport kitted car, so standard will stay.

As for the bodywork, pretty much same as above, on the offside I will start prepping the car, sanding it down removing any trim (I've worked in paint industry for 10 years so don't panic biggrinsmile and just having that side, in a near ready to finish prep stage. When it gets to the bodyshop it will be 5 people flat out on it, day and into the night, I've got a few people on board for this so I'm hoping it can be done.

MOT it really shouldn't need much, it was put through an "MOT" before it came off the road, where it had two advisories for rear trailing arm bushes, these were replaced, and it had a lot of work done prior to that, new fuel lines, brake lines, discs, pads, fluid, flexis, springs, shocks on the front, steering components, so I am not expecting too much on a failure, but only time will tell.


That all said, you're still very much right in that it is a huge job for a week, it may happen, it may fail miserably and what will be will be, I am not going to rush it into a st finish, so if I need to pull the plug on the speed, I will.



What I am really stuck with is, I've currently got a door, I think I did buy it off you years ago...possibly, I've got the door on the car it just sits way too low and doesn't latch, and with the window how it operates I don't want to end up with issues trying to align it all up.

(though I am possibly in search for a set of side/fog lights for it, offside one is cracked)

8Tech

2,222 posts

229 months

Tuesday 2nd February 2016
quotequote all
From memory, you should be able to slacken the fixing bolts on the mountings on the door hinges and get the door in alignment. The glass is adjustable separately in all 3 dimensions, but it sounds like it is the door mounting you are struggling with.
Try cracking off the hinge bolts and see how much movement you then get on the door.

Little chance of the front lamp, they are no longer available and I only have a nearside one left. From 8 cars I have broken, I have only ever recovered 2 unbroken lamps, so used ones are worth as much as new ones used to be.

Edited by 8Tech on Tuesday 2nd February 18:53

Spudler

3,985 posts

227 months

Tuesday 2nd February 2016
quotequote all
8Tech said:
Little chance of the front lamp, they are no longer available and I only have a nearside one left. From 8 cars I have broken, I have only ever recovered 2 unbroken lamps, so used ones are worth as much as new ones used to be.
Bugger! frown
Just bringing my 850 back to life after being laid up for several years and a pair of ftp lamps were on the list.

Do you know if anyone has carried out an acceptable repair to the originals?
Got to go through the car and see what needs replacing so will be in touch.

8Tech

2,222 posts

229 months

Wednesday 3rd February 2016
quotequote all
I have the last known left hand new one worldwide if you need one. The other will be a search but dont forget, only European ones use the tinted indicator, the rest of the world are bright orange. I was keeping a pair as spare for my own car, inadvertantly sold the drivers side so may as well now sell the passenger side.