E36 M3 clocks into a nonM...
Discussion
Afternoon all,
In my previous E36 the previous owner had retrofitted M3 clocks and used the M3 oil temp sensor that usually runs into the S50 oil filter housing, as a sump plug.
I loved having oil temp sensor (a bit geeky I know), and now that I've got another E36 I want to do the same, but I'm wondering if I can use an aftermarket sensor somewhere in the M52 oil filter housing?
This would reduce cost, but also reduce the risk of breaking the sensor when changing oil, something I did do once before.
http://www.ebay.co.uk/itm/Aftermarket-Gauge-Univer...
It would be this kind of sensor I would look to use. They just have the two wires, a ground and a signal. I know the M3 clocks only have a signal wire too, so where does the power come from, or does it not need any power?
Thanks for any help with figuring this out. If people have a better idea hit me!
Cheers
Dan
In my previous E36 the previous owner had retrofitted M3 clocks and used the M3 oil temp sensor that usually runs into the S50 oil filter housing, as a sump plug.
I loved having oil temp sensor (a bit geeky I know), and now that I've got another E36 I want to do the same, but I'm wondering if I can use an aftermarket sensor somewhere in the M52 oil filter housing?
This would reduce cost, but also reduce the risk of breaking the sensor when changing oil, something I did do once before.
http://www.ebay.co.uk/itm/Aftermarket-Gauge-Univer...
It would be this kind of sensor I would look to use. They just have the two wires, a ground and a signal. I know the M3 clocks only have a signal wire too, so where does the power come from, or does it not need any power?
Thanks for any help with figuring this out. If people have a better idea hit me!
Cheers
Dan
From what I can recall, the sensor is just a thermal resistor so the clocks provide the power and the amount of resistance that it sees determines the temperature of the oil. The M3 sensor has a ground and signal wire:
http://wedophones.com/Manuals/BMW/1998%20BMW%20318...
The biggest issue I can recall was finding somewhere that had a constant flow of oil, rather than just sitting in a pool which would take forever to heat up.
Alternatively you could get a tiny sensor and have the banjo bolt for one of the oil lines drilled and tapped to accept it:
http://sourceautomotive.biz/images/products/detail...
http://wedophones.com/Manuals/BMW/1998%20BMW%20318...
The biggest issue I can recall was finding somewhere that had a constant flow of oil, rather than just sitting in a pool which would take forever to heat up.
Alternatively you could get a tiny sensor and have the banjo bolt for one of the oil lines drilled and tapped to accept it:
http://sourceautomotive.biz/images/products/detail...
Edited by Dannbodge on Monday 15th February 15:27
Edited by Dannbodge on Monday 15th February 15:28
Dannbodge said:
From what I can recall, the sensor is just a thermal resistor so the clocks provide the power and the amount of resistance that it sees determines the temperature of the oil. The M3 sensor has a ground and signal wire:
http://wedophones.com/Manuals/BMW/1998%20BMW%20318...
The biggest issue I can recall was finding somewhere that had a constant flow of oil, rather than just sitting in a pool which would take forever to heat up.
Alternatively you could get a tiny sensor and have the banjo bolt for one of the oil lines drilled and tapped to accept it:
http://sourceautomotive.biz/images/products/detail...
Taking a reading from a pool of oil wouldn't really concern me, that's where I read it on my old E36 from the sump. http://wedophones.com/Manuals/BMW/1998%20BMW%20318...
The biggest issue I can recall was finding somewhere that had a constant flow of oil, rather than just sitting in a pool which would take forever to heat up.
Alternatively you could get a tiny sensor and have the banjo bolt for one of the oil lines drilled and tapped to accept it:
http://sourceautomotive.biz/images/products/detail...
Edited by Dannbodge on Monday 15th February 15:27
Edited by Dannbodge on Monday 15th February 15:28
Thanks for the link, I'll check em!
E-bmw said:
Just be careful & check the thread of the sensor.
I know it sounds stupid, but 1/8" NPT looks very similar to m10 x 1.0 but is not, and don't forget it is tapered, so make sure you google the correct drill size & get the correct tap.
Thanks sir. I already have a spare 1/8" NPT sensor so should be good to go with that. Will need to buy the tools, but I'd rather have them spare for next time I know it sounds stupid, but 1/8" NPT looks very similar to m10 x 1.0 but is not, and don't forget it is tapered, so make sure you google the correct drill size & get the correct tap.

All the best.
Gassing Station | BMW General | Top of Page | What's New | My Stuff


