Replacement steering wheel on '99 E36 328i
Discussion
I'm trying to replace the steering wheel on my 328i as I'd like a more track oriented one. However, I've started looking and the initial research suggests that the one advertised for the E36 don't fit the 1998/99 cars.
Can anybody point me in the direction of the boss that I'll need for my particular model please?
Can anybody point me in the direction of the boss that I'll need for my particular model please?
Any "track oriented" wheel will fit, it is the hub about which there are issues, as most do not allow the fitment of the airbag.
If you don't want the airbag there is no issue.
Mine is a late '98 328 & I used one of these.
http://www.ebay.co.uk/itm/BMW-E36-Hub-Boss-Adapter...
If you don't want the airbag there is no issue.
Mine is a late '98 328 & I used one of these.
http://www.ebay.co.uk/itm/BMW-E36-Hub-Boss-Adapter...
E-bmw said:
Any "track oriented" wheel will fit, it is the hub about which there are issues, as most do not allow the fitment of the airbag.
If you don't want the airbag there is no issue.
Mine is a late '98 328 & I used one of these.
http://www.ebay.co.uk/itm/BMW-E36-Hub-Boss-Adapter...
Yes,I don't want the airbag anymore. Thanks for the link, I will have a look into it. If you don't want the airbag there is no issue.
Mine is a late '98 328 & I used one of these.
http://www.ebay.co.uk/itm/BMW-E36-Hub-Boss-Adapter...
andye30m3 said:
E-bmw said:
If you don't want the airbag there is no issue.
Only issue could be MOT time as I believe they are now required to check airbag systems.I think you can get away with it in a fully prepared race/track/rally car but they should fail an otherwise standard road car.
It is very easy to con the system into thinking it is working, a 2.2 ohm resistor across the terminals keeps the system happy & makes the warning light do what it should.
E-bmw said:
Collectingbrass said:
You may know this already but the 1998/99 cars were a facelift and there were quite a few subtle but significant changes when it comes to swopped parts fitting later.
That might need a bit more checking, as mine was a 98 & COULD have been pre-change.Gassing Station | BMW General | Top of Page | What's New | My Stuff



