E46 M3 minor issues
E46 M3 minor issues
Author
Discussion

rossw46

Original Poster:

1,293 posts

191 months

Wednesday 17th August 2016
quotequote all
You just couldn't make it up, had my 2003 M3 for 18 months with zero issues, and then 2 problems just today, and one about 2 weeks ago.

Rear view mirror - got the dreaded bubble, luckily no fluid leak, bought a new internal section and replaced - £100

ABS + DSC lights came on today out of the blue - Spent about 2 hours taking 3 wheels off, and removing the ABS sensors to clean them, also found the movement sensor on the front offside suspension arm had become detached, bingo I thought, re-attached it using cable ties (temporary fix) and thought this would be the solution. It wasn't.

I'd pretty much given up this evening, and I thought I'd give the 4th wheel sensor a clean, and it's only worked ! Sods law, of the 4 sensors, it would be the last one I clean that is the culprit.

Also today, the drivers door lock actuator stopped working, very annoying. Seems I can get a new one for £96, has anyone fitted one themselves, is it a hard job ?

Also, anyone had rust on the front arches, and had it treated, any idea of the cost.

Despite this, I love the car to bits, I've got to spend a good few quid soon (front tyres, oil service, rust on front arch, new brake lines) but I knew these items would come up when I bought her, and I still feel it's well worth it, it puts a smile on my face every time !

Any help appreciated.



Only mods are a scorpion exhaust, and a K-Sport 8 pot big brake kit on the front.

robbiekhan

1,637 posts

208 months

Thursday 18th August 2016
quotequote all
ABS + DSC light might be your DSC pressure sensors. As you've had the wheels off and checked the usual culprits. Hook it up to Carly for BMW app or laptop and run a scan for fault codes to determine the root cause.

Mine was DSC pressure sensor 1, then 2. Replaced both last year and all perfect again. They are £90 each and a BMW only part. As you've got an oil service coming up, may as well get these done at the same time and get fresh brake fluid in the process. If it is the DSC pressure sensor(s).

Actuator is a right pain, easy enough task, just the space you have to work with to get your hands in is murder. Never again lol. Think I paid £67 or something off eBay for the actuator.

As for rust, any decent bodyshop should be able to deal with it and respray the wing and blend it into the panel. A used and non-rusted wing should'nt bee too expensive either though. If you can find one in the same colour, might just require a machine polish and wax to get it looking like new again.

Edited by robbiekhan on Thursday 18th August 12:09