E61 front brakes
E61 front brakes
Author
Discussion

Paulprior

Original Poster:

880 posts

136 months

Monday 5th September 2016
quotequote all
Hi, my car tells me the front pads are low and need changing, what thickness would they be down to before replacement, same question for discs?
Any recomendations on suitable replacements, I just drive fairly normally, mainly on motorways, the car is a 2008 520d.
Thanks
Paul

helix402

7,913 posts

213 months

Monday 5th September 2016
quotequote all
Min disc thickness is stamped on the disc (wheel off to check) or in technical data books. Min pad thickness is up to you, 3mm would be a sensible min thickness of friction material. Pad and disc manufacturers? Try the usual Jurid, ATE, Bosch, Brembo, Textar. I wouldn't recommend Pagid pads as I have found they squeak. Don't forget a new sensor.

trickywoo

14,282 posts

261 months

Tuesday 6th September 2016
quotequote all
Has it come up on the idrive or is it actually a low pad warning? Generally if you can feel a pronounced lip on the edge of the disc and your pads are low its a good time to do both. Depending on the quality of components its often possible to get use from two sets of pads per set of discs.

I recently got a set of Bosch front discs and pads for a 545i for a very keen price, £190 delivered so its well worth shopping around.