bmw 320i 2008 cylinder locations
bmw 320i 2008 cylinder locations
Author
Discussion

bmw320i786

Original Poster:

2 posts

120 months

Saturday 12th November 2016
quotequote all
Need some help in finding the location for cylinder # 2. It's misfiring and needs ignition coil changing. Is cylinder # 4 near bumper/radiator?

I appreciate your help in advance.

AdamIndy

1,661 posts

135 months

Saturday 12th November 2016
quotequote all
No.1 is normally timing belt/chain end i.e. Closest to the radiator on your car. #2 will be the second cylinder back.

helix402

7,913 posts

213 months

Saturday 12th November 2016
quotequote all
As above. Injectors go on these too.

iSore

4,011 posts

175 months

Saturday 12th November 2016
quotequote all
Whilst you're in there, remove the cam cover and inspect the timing chain and upper guide rail - a very common problem on the N43. It's quite simple to replace before it breaks up, but an utter disaster when (not if) it fails.

northwest monkey

6,370 posts

220 months

Saturday 12th November 2016
quotequote all
bmw320i786 said:
Need some help in finding the location for cylinder # 2.
It will be the one coming through the cylinder head sooner rather than later winklaugh

bmw320i786

Original Poster:

2 posts

120 months

Sunday 13th November 2016
quotequote all
thanks Adam, helix!

I have changed ignition coil and it runs smooth now. However I couldn't check the timing chain. The car is done 53k, is there any recommended maintenance for it? I heard it's 60k...

helix402

7,913 posts

213 months

Sunday 13th November 2016
quotequote all
Glad it's sorted. There is no set timing chain interval. The best way to make it last is to do regular oil and filter changes. Maybe every 8k miles / 1 year, with LL04 oil and a Mann/Mahle/or gen BMW filter.

iSore

4,011 posts

175 months

Monday 14th November 2016
quotequote all
bmw320i786 said:
thanks Adam, helix!

I have changed ignition coil and it runs smooth now. However I couldn't check the timing chain. The car is done 53k, is there any recommended maintenance for it? I heard it's 60k...
I've seen them break up at 30/40k. Some done 150'000.