BMW E91 325d with a bad OBD attitude - help appreciated!
Discussion
Hi all, hope everyone is well.
I'm having a bit of a 'mare with my E91. It's a 2007 M sport, had it for 2yrs, love it to bits. Basically it won't start and I'm struggling to diagnose. I'm from the Mk2 Fiesta / Pug 205 era so the OBD thing isn't something I'm very experienced with; I prefer ratchet to a comms port...!
I'll try not to waffle, here's the rub of the green...
I've done the usual searching but can't find anything related - other posts about this fault light tend to be that it came on while driving and doesn't prevent start.
Any help you guys can give would be a huge bonus - thanks!
I'm having a bit of a 'mare with my E91. It's a 2007 M sport, had it for 2yrs, love it to bits. Basically it won't start and I'm struggling to diagnose. I'm from the Mk2 Fiesta / Pug 205 era so the OBD thing isn't something I'm very experienced with; I prefer ratchet to a comms port...!
I'll try not to waffle, here's the rub of the green...
- 1 week ago, car refused to start. The usual clicks, then nothing, then a solid emissions / check engine light. (No check control messages on iDrive). Ambient temps were around 7 degC, car had been used daily prior.
- Purchased a MaxiScan MS300 OBD2 reader https://www.amazon.co.uk/gp/product/B01DVRE2M0
- Read the manual and plugged the OBD tool in. It showed no codes; "DTC 00" "I/M YES"
- Tried to erase codes anyway and got "Erase fail"
- Car began to behave very strangely.
- Figured all my messing around had drained battery. I found a deep moat of ice surrounding the battery and that took a while to remedy.
- Charged battery overnight (last night). OEM indicator never changed - (clear(ish) with black centre, but charger said it was ready to go).
- Re-fitted battery and was back to original not starting fault. Plugged in OBD tool, it read "DTC 00" "I/M YES" but this time when asked to erase it responded "erase success"
- Still no change when trying to start car.
I've done the usual searching but can't find anything related - other posts about this fault light tend to be that it came on while driving and doesn't prevent start.
Any help you guys can give would be a huge bonus - thanks!

Just because I don't like un-finished help threads.
Essentially, the bulkhead stud taking positive line through the body had corroded through due to the water. DIY fix on cable, freshen the battery, good to go.
The real annoyance is the car simply reporting "check engine / emissions". For an intelligent car, I would have thought it might have pointed to something better than that...?

Essentially, the bulkhead stud taking positive line through the body had corroded through due to the water. DIY fix on cable, freshen the battery, good to go.
The real annoyance is the car simply reporting "check engine / emissions". For an intelligent car, I would have thought it might have pointed to something better than that...?

Gassing Station | BMW General | Top of Page | What's New | My Stuff


