E60/61 rear alignment?

[PLuKE]

I had my E61 wheel alignment done, the rear inner shoulders was wearing and sawtooth, which as you know is common!

The rear was within spec -2.0 but I asked them to aim for -1.2 but could only get it to -1.35.

It seems to of helped, as the the rears have been making a howling/whine noise. Is it possible on the M sport LCI to get -1.0 on the rear? The tech said he was on the limit.

Also, should the rear and front toe be equal 0.0 degree? On the same axle?

[hornetrider]

How is your air compressor sounding? I found I was getting excessive wear on my inner rears and occasional suspension bongs, when I bought a new upgraded air compressor from ebay.de it resolved the issue.

[PLuKE]

I sometimes hear a normal compressor noise.

Rear isn't sagging and looks level. No noises etc either, smooth riding.

Luke

[helix402]

Why did you want -1.2 rear camber? Afraid I don't understand your toe question, it's all in spec.

[PLuKE]

helix402 said:

Why did you want -1.2 rear camber? Afraid I don't understand your toe question, it's all in spec.

I wanted -1.2 rear camber, but the guy could only get it to -1.35 he said that it's right on the boarder, I am guessing of the adjustment.

When I have looked and reading online, it seems the toe should be equal on the same axle, and/or 0.0 degrees.

Luke