BMW 650i E63 - Oil Filler Cap
Discussion
With the car running; remove the oil filler cap and see if it creates a vacuum on your hand
A slight vacuum is fine, but if it’s really pulling on your hand, it’s the CCV bad needs replacing
However; the oil filler caps have a small rubber seal, if this is split at all, it’ll seep oil, so check that too
A slight vacuum is fine, but if it’s really pulling on your hand, it’s the CCV bad needs replacing
However; the oil filler caps have a small rubber seal, if this is split at all, it’ll seep oil, so check that too
Gassing Station | BMW General | Top of Page | What's New | My Stuff


