2021 bmw m135i
2021 bmw m135i
Author
Discussion

Mattiebmw

Original Poster:

199 posts

149 months

Hi all,

I’ve just bought myself a lovely gray bmw m135i on 26000. She’s got a good history. The PDI was done on 6miles then a service at 6500 one at 14000, then a full service was completed by the dealership prior to sale.

I won’t be sticking to the silly bmw service intervals I’ll be getting it done every 8k or so, at my local specialist.

My question is, is there any preventative maintenance is should be doing? I know the 26k is low but the car will be 6 years old next year.

Mattiebmw

Original Poster:

199 posts

149 months

Sorry I forgot to say, thanks in advance 👍🏻👍🏻👍🏻

alpinab3

241 posts

220 months

Yesterday (21:51)
quotequote all
Rust proofing it with Bilt Hamber UC for the exposed areas and S50 for cavities. Obviously after removing all the undertrays and arch liners and cleaning it.

danb79

13,953 posts

103 months

Mattiebmw said:
Hi all,

I ve just bought myself a lovely gray bmw m135i on 26000. She s got a good history. The PDI was done on 6miles then a service at 6500 one at 14000, then a full service was completed by the dealership prior to sale.

I won t be sticking to the silly bmw service intervals I ll be getting it done every 8k or so, at my local specialist.

My question is, is there any preventative maintenance is should be doing? I know the 26k is low but the car will be 6 years old next year.
As said above - I'd absolutely strip all 4 corners back; wheel arch liners out, deep clean everywhere, dry off thoroughly and then coat the suspension, shocks & springs with Bilt Hamber Dynax UC (the clear stuff) and do the inside of the arch as well

I've no idea what these cars are like for corrosion on the bodywork; but you could also do the sills with BH Dynax UB (brown) as it's not seen and it'll protect the insides from corroding where you can't see it etc

You could maybe look to do an overhaul of a few bits too for peace of mind (engine oil & filter, fuel filter, diff fluid, air & cabin filters etc)

You know it's done then

vimotu44

4 posts

1 month

Enjoy the new car! I'd ask the selling dealer for an itemised breakdown of that pre-sale service, then check it against the iDrive service history and due items. In particular, confirm the last brake-fluid change and whether the plugs and air filter were done, so you know what that “full service” actually included.

I'd also check the tyres' date codes and condition, even if the tread looks healthy. If they're the originals, have a tyre shop inspect them. Your specialist can then base any extra work on what's due and what the inspection finds.

Mattiebmw

Original Poster:

199 posts

149 months

Hi guys.

Thanks for the reply’s, I hadn’t thought about rust proofing if I’m honest.

With the full service, plugs, brake fluid etc have all been done, I’ve got the paper work and I’ve checked that with the idrive so we’re all good. The dealership are reputable and I’d be more than happy to buy a car from them again (not sure if you’re allowed to name).

Good shout on the tyres, they look new to me but I’ll double check the stamps when I get home.

I was thinking preventative maintenance around the gear box or x drive system?

Thanks Matt

bigdom

2,361 posts

176 months

X drive and ZF can be done at 60k.

Mattiebmw

Original Poster:

199 posts

149 months

Ok, aye I was reading that bmw say the box is sealed for life but that’s a load of rubbish. I think I’ll just ring my local specialist and book it in for both anyway.

Thanks Matt