530d breather valve
530d breather valve
Author
Discussion

billy5

Original Poster:

235 posts

235 months

Friday 9th November 2007
quotequote all
hiya all,
been ages,,
been reading about turbo failure and how to prevent it,
i think proper servicing ,using the right oils
not ragging it when its cold is all important,
mine has done 118,000 and sounds sweet as a nut,
ive heard that the engine breather valve can have a bad
influence if its not changed,
can any one shine any light on when this should be sorted,
does it come under services at given times,
thanks all,
bye the way,, to all who remember the air con thing,
total shut down, it came back on and has been ok ever
since, wierd

volvos60s60

581 posts

243 months

Saturday 10th November 2007
quotequote all
Breather assembly is an easy replace. Parts cost about £35 from a dealer & takes 45 mins to do at home. Buy the one with the blue cylindrical foam insert.

Also remove clean out the EGR valve as it can get clogged up.

I did both these jobs in about 1.5 hours with no special tools or knowledge. BMWland forum has a write up & photos of the procedures for both jobs with a little searching

Incidentally, I also do intermediate oil changes a thousand miles after the second green service light extinguishes. Mobil 1 which is BMW spec for this engine is £23 + vat for 4 litres from Costco




Edited by volvos60s60 on Saturday 10th November 17:43


Edited by volvos60s60 on Saturday 10th November 17:45

billy5

Original Poster:

235 posts

235 months

Sunday 11th November 2007
quotequote all
hiya volvo, whatis the egr valve,
can you explain, thanks billy5

volvos60s60

581 posts

243 months

Sunday 11th November 2007
quotequote all
The EGR is the exhaust gas recirculation valve. It is basically in the outlet manifold on the front right hand side of the engine bay when viewed from the front. It sites in situ in the manifold & is easily removed. It has a spring loaded plunger which open on pressure. The plunger, which seals on the wall of the valve body can get clogged up. The whole thing can be removed & cleaned with degreaser such as Gunk, but be thorough scraping all the crud away. An easy job which may also help responsiveness as well as helpng the turbo to operate properly



Edited by volvos60s60 on Sunday 11th November 11:15

billy5

Original Poster:

235 posts

235 months

Tuesday 13th November 2007
quotequote all
thanks volvo for the info,
much appriciated,
billy5