E36 Digital Climate Control
E36 Digital Climate Control
Author
Discussion

John Laverick

Original Poster:

2,002 posts

243 months

Tuesday 11th December 2007
quotequote all
I believe it is quite common for these to go up the spout?

Mine is randomly switching on and off at will. Is it possible to fix myself?

Or do need to send it away for repair?

Cheers guys

n.b. If I take the check control unit out and push the wiring connector in it will come back on.

Shropshiremike

24,471 posts

232 months

Tuesday 11th December 2007
quotequote all
John Laverick said:
I believe it is quite common for these to go up the spout?

Mine is randomly switching on and off at will. Is it possible to fix myself?

Or do need to send it away for repair?

Cheers guys

n.b. If I take the check control unit out and push the wiring connector in it will come back on.
Is it the fan that is switching on and off or the whole display John?

If it 's just the fan that is switching on and off ( the display is OK ) it's most likely the final stage resistor pack ( spiky hedgehog thing smile )- about £65-£80 depending on where you get the part.

If it's the display dimming/cutting off it's a capacitor in the CC unit ( a very cheap part at Maplins - 80pence ...or if oyu're not great at electronics can get them repaired via Ebay for about £30 - takes a few days though )

Edited by Shropshiremike on Tuesday 11th December 11:47

Frik

13,679 posts

272 months

Thursday 13th December 2007
quotequote all
Shropshiremike said:
If it's the display dimming/cutting off it's a capacitor in the CC unit ( a very cheap part at Maplins - 80pence ...or if oyu're not great at electronics can get them repaired via Ebay for about £30 - takes a few days though )
yes Very common problem (one I suffer on occasion with too)

Fix here sans images.

John Laverick

Original Poster:

2,002 posts

243 months

Friday 14th December 2007
quotequote all
Brilliant ... thanks guys.

I did this repair last night and its now working 100% again!

I didn't actually replace the capacitor, I simply took the unit to bits heated the joint up and added a touch more solder.