Who's got a V Rod?
Author
Discussion

R11ysf

Original Poster:

1,968 posts

213 months

Tuesday 3rd December 2013
quotequote all
I just hired one of these in South Africa and I have to say it was one of the least enjoyable biking experiences I've ever had. To say it didn't want to go round corners was an understatement! As a bike in town i would rather walk, i honestly thought I was going to crash it at any moment, am I not strong enough or do I need to be heavier (I'm 12st).

My friend who also rode it was much better on it than I was but still said it was a bugger to turn and town riding was only marginally better than the bus.

So who's got one? How the hell do you ride it.

P.S. - I should add that it is stunning to look at and as a garage exhibit I would have one in a heartbeat, just after 30 years of my ownership I can guarantee its mileage would be under 100 miles (presuming I live within 5 miles of a MOT station!)

spoodler

2,307 posts

186 months

Tuesday 3rd December 2013
quotequote all
Not owned a V-Rod but have ridden a few and thoroughly enjoyed them - maybe it's because I'd rather ride pretty much anything than take the bus.
For a long wheel base bike with 35 (or so) degrees of rake the handling isn't bad at all - I always reckoned it was similar to my old eighties muscle bikes but with more grunt and better brakes...

BIRMA

4,285 posts

225 months

Tuesday 3rd December 2013
quotequote all
I tried a couple a while ago as I was seriously considering a V-Rod I did find it needed to be 'man-handled' into bends but I liked that. In the end I bought a Honda Rune which is probably bigger. I think you either like this type of cruiser bike or you don't if you are used to riding lightweight machines they do feel cumbersome. I'm on the side of liking this type of bike and I used to race my Harley down the drag strip at Long Marston in the late 80's and found the experience very addictive and the bike seemed so at home on the drag strip.

R11ysf

Original Poster:

1,968 posts

213 months

Tuesday 3rd December 2013
quotequote all
Birma,
That's exactly what I thought, the rear tyre was nearly as wide as my TVR so I was just thinking this was a straight line monster and nothing else. I honestly nearly dropped it at sub 15mph a couple of times, but above 50mph it did begin to settle.

I actually found the Fatboy easier to move about, I was guessing it was the rear tyre.

BIRMA

4,285 posts

225 months

Tuesday 3rd December 2013
quotequote all
R11ysf said:
Birma,
That's exactly what I thought, the rear tyre was nearly as wide as my TVR so I was just thinking this was a straight line monster and nothing else. I honestly nearly dropped it at sub 15mph a couple of times, but above 50mph it did begin to settle.

I actually found the Fatboy easier to move about, I was guessing it was the rear tyre.
Yes I think you are right the fat rear tyre on the V-Rod is the reason for its handling characteristics. For my sins in a previous life I also had to try a 1950 Harley Davidson WL with a foot clutch, now there is a challenge at low speed. I also used to do trial riding and found that keeping balance at low speed required every bit of my skill as a trial rider otherwise you were on your arse.
Still think Harleys are great bikes despite the image they seem to conjure up.

ZesPak

26,165 posts

227 months

Tuesday 3rd December 2013
quotequote all
I've heard similar comments about the Victory Hammer, apparently the MAHOOSIVE 250mm tyre is to blame, with 240mm the V-rod most definately is in the same ballpark.

bimsb6

8,811 posts

252 months

Tuesday 3rd December 2013
quotequote all
I have a street rod , the problem is certainly the rear tyre , i put a 200 on the back of mine and it has slowed the steering somewhat so next rear will be a standard size 190 , it handles very well for a hugely long bike it is even longer than a new guzzi california ! Very stable at speed just put it into a corner and it stays there , ground clearance is great and the engine is a peach , brakes are brembos all round so no problem there . They do feel weird at first if you are not used to a raked front end but i don't notice it any more .

Rew

253 posts

227 months

Tuesday 3rd December 2013
quotequote all
I had a V Rod Muscle for the day when I took one of my other bikes in for a service. I rather enjoyed it and it was pretty quick for a big lump of a bike. I do get the cornering thing though, was a bit of a pig if you wanted to change direction at a moments notice. I found it responded better if you also weighted the inside peg.

Apache

39,731 posts

315 months

Tuesday 3rd December 2013
quotequote all
test drove this shortly after one of their latest 1600cc things which felt like a truck in comparison, I rate em, huge fun and a giggle to wrestle round a bend...just a dab of oppo and down she goes


MagnaJeep

309 posts

185 months

Wednesday 4th December 2013
quotequote all
I guess the early ones with the 180 rear tyre are easier to steer around bends.
Apart from that, the long wheelbase takes some time to get used to.

My father has one of the first V-Rods that I used to ride two years ago, when
I bought the Buell I stopped using it entirely. When we switched the bikes
recently in the middle of a very twisty tour I thought that I'm going to stack it into the ditch in
the first couple of corners. Few minutes of adapting to it and it felt right again.

This one is a keeper, bought for a whopping 6,5k pounds



bogie

17,108 posts

303 months

Wednesday 4th December 2013
quotequote all
I get on great with mine and don't have a problem keeping up with friends at sane road speeds...but you do need to spend a few quid and set them up properly. The different models are all slightly different "out of the box" and there were good improvements on most recent models. USD forks and lighter wheels on latest Nightrod and VRSCF

Ive got rebuilt forks with cartridges, shocks built for me, and moved the pegs round a bit to give more ground clearance

The tyres make a huge difference, due to each brands profile and weight. Stock dunlops particularly crap...and get worse with wear. This could have been some of the problem with your experience. You can lose a few kg just off the rear by changing from the stock tyres to a Metz or Conti attack...it feels like a different bike afterwards and turns in loads easier...you really need to positively counter steer and shift body weight to get it through the twisty stuff, but it can be done smile

castex

5,188 posts

304 months

Wednesday 4th December 2013
quotequote all
I like these. The only one I've ever seen used to arrive with the Hoppings every year (big fair in Newcastle). It was always parked right in the middle of a load of slot machines, like it could be won if all the cherries came up.

No-one's mentioned them being massively quick to accelerate which is a shame, because they look it.

bogie

17,108 posts

303 months

Thursday 5th December 2013
quotequote all
castex said:
I like these. The only one I've ever seen used to arrive with the Hoppings every year (big fair in Newcastle). It was always parked right in the middle of a load of slot machines, like it could be won if all the cherries came up.

No-one's mentioned them being massively quick to accelerate which is a shame, because they look it.
yeah, off the line they are quick, and very easy to launch consistently

...most people do "stage 1" upgrades from new which is exhaust/filter/remap and get another few bhp out of it. The Revo engine sounds awesome too on aftermarket pipes...Porsche Engineering did a good job there...

I dropped the gearing 2 teeth up front....that's another thing HD changed for outside US market..HD think because we cruise at higher speeds in Europe we need a naked bike thats geared for 150mph ....im quite happy with 140mph and improved in gear performance



vrod

961 posts

221 months

Friday 6th December 2013
quotequote all
Mine is the Night Rod Special so its slightly lower than a standard V-Rod and I have a 260mm rear, but I still find the handling fine. It did take a few changes and some getting used to, Metzler tyres and a front fork brace improve the handling alot, biggest problem is ground clearance.

On an open road the handling is great, you just need the balls to lean it. When your used to light or sports bikes you under compensate thinking its going to throw you in the hedge, it won't. The tyres will grip until the pegs go down first, then the frame, exhaust or in rare leans the radiator grille.

Took mine on the 2009 bike banter euro trip a few years ago with Chilli, Tori, Rob, Stu, 2seas, Bob ... to name just a few, only person I couldn't keep up with was Mrs Miggins, but then again not many others could either. I found the handling and power good enough to keep up with most the sport bikes in the group (even on the 147*** straight), its fast town riding with roundabouts that you end up grinding bits off you bike. Had a great time, need to do it again some time!




bass gt3

10,758 posts

264 months

Friday 6th December 2013
quotequote all
R11ysf said:
I just hired one of these in South Africa .....
Whereabouts were you riding??

V8 FOU

3,023 posts

178 months

Saturday 7th December 2013
quotequote all
I work on these and other Harleys in my business.
The Street Rod is the better handling of all the Rods. The main "problem" is having a large back tyre it will wear to a square shape, thus making it harder to tip into a corner. All Harleys are very sensitive to tyre pressures, most I see for servicing have around 18psi front and 24 rear instead of 30/36.
Next thing is rear shox. The stock units are very soft, so will compress and cause the front wheel to "kick out" to give greater head angle and trail, thus heavier and less responsive steering. Best cure is quality shox that are around 1/2" or 1" longer - then the bike will ride level under load.


Easy answer as pointed out earlier is to counter steer.....

bimsb6

8,811 posts

252 months

Saturday 7th December 2013
quotequote all
V8 FOU said:
I work on these and other Harleys in my business.
The Street Rod is the better handling of all the Rods. The main "problem" is having a large back tyre it will wear to a square shape, thus making it harder to tip into a corner. All Harleys are very sensitive to tyre pressures, most I see for servicing have around 18psi front and 24 rear instead of 30/36.
Next thing is rear shox. The stock units are very soft, so will compress and cause the front wheel to "kick out" to give greater head angle and trail, thus heavier and less responsive steering. Best cure is quality shox that are around 1/2" or 1" longer - then the bike will ride level under load.


Easy answer as pointed out earlier is to counter steer.....
I assume the incorrect tyre pressures are due to neglect rather than choice in most cases ? Interesting as my fxr feels a lot more planted with lower front tyre pressure so i tend to run it as such .

V8 FOU

3,023 posts

178 months

Saturday 7th December 2013
quotequote all
bimsb6 said:
I assume the incorrect tyre pressures are due to neglect rather than choice in most cases ? Interesting as my fxr feels a lot more planted with lower front tyre pressure so i tend to run it as such .
Indeed.

I wonder what tyre you have on your FXR and how old it is? You should run 30psi assuming it is a 19"

bimsb6

8,811 posts

252 months

Saturday 7th December 2013
quotequote all
V8 FOU said:
Indeed.

I wonder what tyre you have on your FXR and how old it is? You should run 30psi assuming it is a 19"
It is a 19. Not sure what make it is not used it this year . It's an fxr se 1987

V8 FOU

3,023 posts

178 months

Sunday 8th December 2013
quotequote all
Nice bike apart from the wobbly 35mm forks! I think you have answered the question.... Time for a new front and poss rear tyre if they are more than 5 years old. Very common problem, and it is important to use the right make of tyre. Not Avon for starters.