VFR 400 NC30 prices - £1k to £10k
VFR 400 NC30 prices - £1k to £10k
Author
Discussion

.blue

Original Poster:

726 posts

211 months

Saturday 15th August 2015
quotequote all
Toying with the idea of a 400 supersport and the NC29/30 Honda's look appealing.

I'm trying to get my head around pricing. I've got a budget of 1.5k and there seem to be a few in my budget.

But I don't understand what's driving pricing.

e.g. Look at the ebay listings page where you'll find them from £1k to £10k (http://www.ebay.co.uk/sch/i.html?_from=R40&_trksid=p2047675.m570.l1313.TR12.TRC2.A0.H0.Xvfr400.TRS0&_nkw=vfr400&_sacat=0). Any help getting my head around the variances and what I should be looking out for?

cat with a hat

1,488 posts

149 months

Saturday 15th August 2015
quotequote all
Greedy kunts trying to turn the bike market into the classic car market.

Baryonyx

18,295 posts

190 months

Saturday 15th August 2015
quotequote all
They are great bikes. I've long lusted after one and gave serious thought to buying a Rothmans liveried one that Pagett's had in stock for what seemed like forever. I never did go after it though. Some of my good friends have ridden and owned them, and I hope to get a jump on one some day and see what all the fuss was about.


In terms of things to look out for, I was given the following advice from owners, but PH'ers will surely know better and will be able to advise:

  • Pitted and rusted downpipes are a common issue
  • The clamps that hold the exhaust system together underneath the oil cooler can easily corrode into nothing.
  • Random electrical maladies caused by old wiring
  • Check for a valve clearance service, and if in doubt, get one done yourself. Often skimped on apparently, due to the cost involved in dropping down the V4 engine to get to the valves.
Otherwise, they seem to be very well made bikes and should be given the usual checks (is it an import? Have the clocks been changed? Is it straight? Do the panels fit? Has it been raced? Is the suspension shagged or leaking, is the headstock tight? They're supposed to have a very long first gear too, so expect that.

Prices do indeed seem to to be all over the place, and reading some classified ads, it seems some owners are hedging on the old Japanese 400's going the way of the 250cc two strokes and becoming very collectible, very fast. I don't know if that'll quite happen, as the two strokes are so different from the 4 stroke bikes and what will buy you a very good VFR400 will also buy you a very good Fireblade or similar from that era. There was the RVF400 that came afterwards, in general, they seem to command a little more on the used market but a cursory glance over a few classifieds often showed me that the RVF400 was perhaps more likely to be in better shape.

Good luck, and let us know how you get on.

.blue

Original Poster:

726 posts

211 months

Saturday 15th August 2015
quotequote all
Baryonyx said:
They are great bikes. I've long lusted after one and gave serious thought to buying a Rothmans liveried one that Pagett's had in stock for what seemed like forever. I never did go after it though. Some of my good friends have ridden and owned them, and I hope to get a jump on one some day and see what all the fuss was about.


In terms of things to look out for, I was given the following advice from owners, but PH'ers will surely know better and will be able to advise:

  • Pitted and rusted downpipes are a common issue
  • The clamps that hold the exhaust system together underneath the oil cooler can easily corrode into nothing.
  • Random electrical maladies caused by old wiring
  • Check for a valve clearance service, and if in doubt, get one done yourself. Often skimped on apparently, due to the cost involved in dropping down the V4 engine to get to the valves.
Otherwise, they seem to be very well made bikes and should be given the usual checks (is it an import? Have the clocks been changed? Is it straight? Do the panels fit? Has it been raced? Is the suspension shagged or leaking, is the headstock tight? They're supposed to have a very long first gear too, so expect that.

Prices do indeed seem to to be all over the place, and reading some classified ads, it seems some owners are hedging on the old Japanese 400's going the way of the 250cc two strokes and becoming very collectible, very fast. I don't know if that'll quite happen, as the two strokes are so different from the 4 stroke bikes and what will buy you a very good VFR400 will also buy you a very good Fireblade or similar from that era. There was the RVF400 that came afterwards, in general, they seem to command a little more on the used market but a cursory glance over a few classifieds often showed me that the RVF400 was perhaps more likely to be in better shape.

Good luck, and let us know how you get on.
That's really helpful thanks. Going to see one tomorrow and will let you know what I find biggrin

The 400 'blades look great too but very few around.

Simes205

5,031 posts

259 months

Saturday 15th August 2015
quotequote all
I own one.
1.5 - 2k will get you a good import.
3k and upwards will get you a UK bike.
Few cosmetic differences .
Good parts availability although I just waited 4 weeks for a pad spring.
Generally reliable, the best 400.
Nimble fingers are required for mechanical jobs.

You don't need to remove engine for valve shims, just the tank carbs and cam covers off. While you there do the front bank of plugs as they are indeed an arse to get to; and £16 each!

The main electrical part that fails is the rectifier, mine did recently but was fixed once the part arrived.

You'll have a pretty bike, with gear driven cam whine and a v4 howl all the wY to 14k rpm.

Join up on www.greybike400.com


Edited by Simes205 on Saturday 15th August 07:56


Edited by Simes205 on Saturday 15th August 07:58

Yazza54

20,343 posts

212 months

Saturday 15th August 2015
quotequote all
Baryonyx said:
They are great bikes.
...

I hope to get a jump on one some day and see what all the fuss was about
Love it.

Having owned one - They are nice bikes, not massively quick... Realistically no quicker than a ER6, but handle lovely and the mini RC30 aesthetics are a winner. Nice build quality too and best of all - that noise.

This is my old one

https://youtu.be/LF67g-FYXI0

They have a following at the end of the day, UK bikes always command more money. But you should be able to get a fair example around 1500-2000 if you're not arsed about it being a grey import/totally original.

Suggest you bare in mind the ergonomics, I found mine hard work on my wrists etc.

Some pics of mine, had cbr600rr shock, zxr400 USD forks, 17 inch RVF rear wheel (better choice of tyres), race ally lower rad as the standard one takes a beating. Lovely thing but just too uncomfortable for me.







As lovely a thing it was, I had a triumph TT600 after and it was a better bike in every way.... But when I look back, it ain't the Triumph I wish I still owned..!

Mastodon2

14,346 posts

196 months

Saturday 15th August 2015
quotequote all
They're one of those bikes where everyone who owns one seems to have loved it and missed it once it's gone, strong positive feedback.

croyde

26,550 posts

261 months

Saturday 15th August 2015
quotequote all
I had one back in the day. Wish I had kept it.

Hindsight eh!

Charliecloud

308 posts

228 months

Saturday 15th August 2015
quotequote all
I had 3 through the 80 and early 90s. Great bikes and very reliable. Spares shouldn't be a major issue as lots of owners clubs and specialist suppliers. If your not sure what you are looking at,then pay someone a few quid to look with you,so you know what your getting into.
Sure there are lots of faster bikes out there,but on the congested roads in the SE they can barely be used to anywhere near there potential,at least on the 400 you can get close. A good choice !

Yoda400

386 posts

139 months

Saturday 15th August 2015
quotequote all
I have one of each. The CBR is smaller, slower, spongy suspension (I had the forks redone and rear adjusted by 100% but really something modern must be required I suspect. But I'm too anal about non-OEM stuff on that bike to do it). It's in unusually good nick, very clean and beautiful, increasingly rare for these bikes as you'll often see fairings cracks, scrapes, aftermarket tat added which makes you wonder what's happened to them. It's an inline 4 so easier to work on.

The VFR is where my heart is. It's tatty, bought to be a trackbike (road legal too). Sadly it's not running currently due to needing new lower radiator and probably starter relay. The nc30 has two radiators, the lower one being notorious for getting a lot of rubbish in it then clogging up. Both bikes have required a weld on the exhausts. It's 5 years older than the CBR and looks its age. All internal wires grubby, surfacerust on parts, paint peeling off the wheels, it's clearly had a harder life than the CBR, but ok for a trackbike. It really needs a thorough overhaul. But, it's taller, faster, the v4 gear driven cams make a distinctive howl, the brakes and suspension are just so. And if you drop a tooth on the front sprocket it becomes massively quicker on acceleration without losing much top end speed. On the road it's comfortable enough to ride from Chester to Cadwell and back again with a track day in between. Whereas the cbr kills my wrists. You've got specialist support in the form of Rick Oliver who's great for imparting knowledge and selling parts. No-one has ridden it without coming back with a huge grin, including a certain chap with a top spec collection of track bikes who was only supposed to do a few laps on it then come in... He stayed out nearly the whole session until the poor bike was nearly breathing fire! It's plenty fast enough. I rode mid pack inters on it at some tracks, and there was certain pleasure to be gained from overtaking bigger newer bikes; though you'll get some frustration from the straight line heroes gunning it past you down the straights. I suspect I've got away with a lot of hamfisted mistakes because the bike is quite forgiving but it rewards you when you get it right.

I'm selling the CBR and keeping the VFR.

Pope

2,653 posts

278 months

Saturday 15th August 2015
quotequote all
+1 for the tall first gear; just goes and goes - 60mph iirc?!

Had two; my first proper bikes after the hybrid AR50 - aka triggers broom..... more 80 and 125 parts on it than 50. Had a GSXR400 lucky strike as well - 18000rpm and zero torque; ace!

Clutches take a beating from the first gear round town, the single sided swingarm is trick but I found I was always adjusting the chain?! Speedo drives fall apart.

Best bike for learning handling and scraping - pegs touch down very easily once you are 'on it'. Aftermarket exhausts were a rarity as the original system was one piece - no slip-ons available unless you butchered the OE system. Ironically it sounded best just as it ran out of fuel...... it's OK I have reserve.... oh cock; it is on reserve. Kept up with 600's up to the 112mph limit - when the speedo worked, IIRC the restriction was in the clocks ??

AFAIR weren't they all grey import except the 35?

Walter Sobchak

5,739 posts

255 months

Saturday 15th August 2015
quotequote all
I used to have a RVF 400, great bikes, handling is good, they're not massively quick but good fun and sound amazing.
£10k for an NC30 though is just mental, you could have 2, 2 stroke 250s for that.
Have you looked at an MC21 or 28?.

Simes205

5,031 posts

259 months

RedTrident

8,290 posts

266 months

Saturday 15th August 2015
quotequote all
I was looking at a new small capacity sports bike, had a look at the usual stuff like the r3 and the ninja. Then I just went and mot'd the nc30 I've had since I started riding, much nicer bike at least to look at.

3k will get you something decent, some of the cheaper ones have been modded with all sorts. I'd buy the closest you can get to an original. Nor do I think you'll lose money on it.

I keep looking at the rc45s. There's a couple up for sale at the moment but a new baby and the need for a house move mean my money is likely going elsewhere.

JakeC

2 posts

200 months

Saturday 15th August 2015
quotequote all


Hers my uk spec nc30 (been told by honda it was the original press bike as issued with a vfr number plate)

My only advice is be carefull for track bikes that have been turned back in to road bikes, there's many rough ones under those fairings, and when you get one NEVER part with it

Good luck!!

darkyoung1000

2,497 posts

227 months

Sunday 16th August 2015
quotequote all
I picked up my import for £1200 last year.

All original, albeit tatty in places (fairing and tank), but it was bought to ride as well as look at.

So far:

Sump plug sheared off (when undoing can you believe it) needing a 'new' sump for £30
Plugs (as previously mentioned) are expensive, but I got lucky and paid £28 for 4.
Headlight bulbs on the imports are not H4, but H4R (I think) making a bulb upgrade tricky
Radiators do clog up (got into the red while going round Cadwell) but replacement aluminium ones are £130 including hoses (note that some modification is needed)
Not as tricky to access as initially thought - most jobs can be done with time and patience.

The plus side? Oh. My. It's hilarious. My other bike is an SV1000 which while faster in every way doesn't make me smile as much. There's a devil in the Honda that whispers in your ear, 'I'm a miniature race bike....ride me like one'
You can wind it open without fearing for your licence as much, it's beautifully responsive...especially above 10k RPM, but the handling is sublime. My memories of Cadwell were brilliant - the look of surprise from the Ducati rider when I went around the outside at Barn still makes me smile. He buggered off down the straight mind you...only to be passed again at the end. It's all about momentum conservation!

Cheers,
Tom


.blue

Original Poster:

726 posts

211 months

Sunday 16th August 2015
quotequote all
darkyoung1000 said:
I picked up my import for £1200 last year.

All original, albeit tatty in places (fairing and tank), but it was bought to ride as well as look at.

So far:

Sump plug sheared off (when undoing can you believe it) needing a 'new' sump for £30
Plugs (as previously mentioned) are expensive, but I got lucky and paid £28 for 4.
Headlight bulbs on the imports are not H4, but H4R (I think) making a bulb upgrade tricky
Radiators do clog up (got into the red while going round Cadwell) but replacement aluminium ones are £130 including hoses (note that some modification is needed)
Not as tricky to access as initially thought - most jobs can be done with time and patience.
Very useful thanks. Sounds like everything I imagine a 400 supersport would be like!

So this one's £1900 (import). Looks tidy on the outside, just a few tiny cracks in some parts of the fairings. It's done 40k km (clocks are still in km/h) and only really covered 4,000 of those kms in the last 5 years.

Few questions:

1) It makes a creaky noise when you're sat on it. I'm guessing rear suspension. Cause for concern or to be expected on a bike of this age?

2) When turning the handles full lock to the right, the clutch lever knocks against the clocks. I guess it's just needs adjusting but am not the smartest/most experienced mechanic so second opinions?

3) Never had a bike with choke/fuel petcock before (bike is same age as me). Is it normal to have to turn on the choke for a minute before bike starts?

4) No idea how I'd check the rectifier. Is it just best to budget £100 for changing this given that it's probably not been done?

5) Tiny bit of misting on front forks. It was an MOT advisory. Is this just because it's been stored for ages or a sign of fork seals needing a change soon?

And btw, how nickable are these bikes? It could spend some time parked up in Central London during the day with only a disc lock (garaged overnight).

Edited by .blue on Sunday 16th August 21:04

obscene

5,180 posts

216 months

Sunday 16th August 2015
quotequote all
2) they all do that sir
3) yes

Wish I didn't sell mine. You live and learn. That noise cloud9 gear driven cams are epic.

robbocop33

1,207 posts

138 months

Sunday 16th August 2015
quotequote all
cat with a hat said:
Greedy kunts trying to turn the bike market into the classic car market.
Aint that the truth!Some of the prices ive seen for early fireblades and early 2000,s gsxr,s are ridiculous.Seen a few k2 gsxr thou's for £3500!!Eh no,in the real world i got £1950 for my k3 1000,three years ago!!
Seen 99 r1,s for 4 grand,exactly 250 quid more than i got for a mint black 8k 2007 zx10r with akrapovics 2 years ago!!Either im the unluckiest bugger in the world or everyone else lives in a hairy fairy world where they think everyone's loaded and want's screwed!


Edited by robbocop33 on Sunday 16th August 23:19

nickfrog

25,484 posts

248 months

Monday 17th August 2015
quotequote all
robbocop33 said:
cat with a hat said:
Greedy kunts trying to turn the bike market into the classic car market.
Aint that the truth!Some of the prices ive seen for early fireblades and early 2000,s gsxr,s are ridiculous.Seen a few k2 gsxr thou's for £3500!!Eh no,in the real world i got £1950 for my k3 1000,three years ago!!
Seen 99 r1,s for 4 grand,exactly 250 quid more than i got for a mint black 8k 2007 zx10r with akrapovics 2 years ago!!Either im the unluckiest bugger in the world or everyone else lives in a hairy fairy world where they think everyone's loaded and want's screwed!
If it's overpriced it won't sell - nothing greedy, just basic supply and demand economics in a free market.

I really don't see what the problem is.