novice braking maintenance question
Discussion
A500leroy said:
Go easy on me cause I feel stupid for asking, my brake pads are dragging on the disc I can smell them, can I adjust them without renewing the pads? Would adjustment be bike specific?
If you've been riding through the winter salt and s
te, your pistons are probably not returning fully into the calipers.What bike is it?
A500leroy said:
OK, would I need to adjust the rear mastercylinder as there is some movement on it which might just release the pads a little
Sounds like you're talking about the caliper and not the master cylinder. Any sliding piston caliper (piston or pistons on one side only)will rock a little if you try, and if it is totally solid then that indicates a fault such as piston sticking.A500leroy said:
CaptainSlow said:
Might be hard to clean the rear caliper on a cbr250 considering it's a drum brake.
Check again my slow friend the CBR 250 has discs at both ends....;-)eta,
you need to get out there with a bucket of soapy water, some brake cleaner and a toothbrush.
Edited by CaptainSlow on Sunday 26th February 15:51
Gassing Station | Biker Banter | Top of Page | What's New | My Stuff




;)