MV Agusta F4 info
Discussion
Thought it was worth asking if the below MV Agusta F4 1000 for sale on PH classifieds owned by anyone on here?
Just wondered if anyone knows anything before I start asking questions to the seller?
http://www.pistonheads.com/classifieds/motorbikes/...
I'm not local, in fact probably ~200 miles away, so trying to suss it out before wasting anyones time.
Questions I have in mind include belt/valve servicing/paperwork - regardless of miles.
Rear bearing/hub issues are apparently common on these earlier machines.
So if anyone owns one, or has any buying suggestions, then I'm all ears.
Cheers
Tom
Just wondered if anyone knows anything before I start asking questions to the seller?
http://www.pistonheads.com/classifieds/motorbikes/...
I'm not local, in fact probably ~200 miles away, so trying to suss it out before wasting anyones time.
Questions I have in mind include belt/valve servicing/paperwork - regardless of miles.
Rear bearing/hub issues are apparently common on these earlier machines.
So if anyone owns one, or has any buying suggestions, then I'm all ears.
Cheers
Tom
I've just traded my 2014 (2010 MY) F4 1000 R in for a new R1. There was noting wrong with the F4, but I have very little confidence in the brand, parts supply etc going forwards, the nearest dealer to me (assuming they carry on with MV) was 70 miles away.
Warranty support was a nightmare, some parts take ages to arrive and they are quite expensive, as is servicing.
I've not had any issues with the hub (mine had 10,300 miles on it), the only real problem I had was at 2700 miles when I had a front disc warp. I had a real battle to get them to replace them under warranty.
Beautiful looking thing though, very elegant compared to my R1 which looks great in a different sort of "industrial, space age tech" way. Amazing one finger brakes too - I'm surprised at how much better they are than a new R1.
Build quality in general - very good but not as good as a Yamaha, Honda or Kawasaki sportsbike.
Annoying niggles - they get very hot, the back brakes are s
t and stop working needing mucho bleeding, the expansion tank is the size of a thimble so you end up with no coolant. The digital dash always worried me though. If that breaks then £££££££££££££££sssss. Mine was also getting some suspicious tank distortion (I could see it, doubt many others would. Yet) which I believe is down to ethanol being introduced in the fuel. Good luck trying to get MV to sort that one. Again £££££££££££££££££££s.
That 10K for a 2006 bike looks steep though.
Warranty support was a nightmare, some parts take ages to arrive and they are quite expensive, as is servicing.
I've not had any issues with the hub (mine had 10,300 miles on it), the only real problem I had was at 2700 miles when I had a front disc warp. I had a real battle to get them to replace them under warranty.
Beautiful looking thing though, very elegant compared to my R1 which looks great in a different sort of "industrial, space age tech" way. Amazing one finger brakes too - I'm surprised at how much better they are than a new R1.
Build quality in general - very good but not as good as a Yamaha, Honda or Kawasaki sportsbike.
Annoying niggles - they get very hot, the back brakes are s
t and stop working needing mucho bleeding, the expansion tank is the size of a thimble so you end up with no coolant. The digital dash always worried me though. If that breaks then £££££££££££££££sssss. Mine was also getting some suspicious tank distortion (I could see it, doubt many others would. Yet) which I believe is down to ethanol being introduced in the fuel. Good luck trying to get MV to sort that one. Again £££££££££££££££££££s. That 10K for a 2006 bike looks steep though.
I didnt have the F4 but I had a Dragster RR for 18 months and put 10,000 miles on it. Although not a perfect match I can also echo what dog star just said
3750 mile service intervals with the major one being at just 7500. Paint is thin so chips easy, my two dealers both closed down in 2016 meaning Bennetts (are are simply the best about) were the only option and 240 miles for me
I had to uprate the clutch hub as it was weak and started slipping. The rear hub was fine but 250nm is what they say to hold the sprocket and wheel on and believe me enthusiastic riding/track days/1/4 mile strips will get it hot and make it a pig to remove...it happened to me 3 times
All being said Id have another but maybe as a second bike. My Aprilia by comparison is like a Honda for quality and Aprilia aren't exactly Yamaha or Honda build quality!
The guy that bought my bike from the shop after rejected it after less than 500 miles as it broke down...I must've been lucky
3750 mile service intervals with the major one being at just 7500. Paint is thin so chips easy, my two dealers both closed down in 2016 meaning Bennetts (are are simply the best about) were the only option and 240 miles for me
I had to uprate the clutch hub as it was weak and started slipping. The rear hub was fine but 250nm is what they say to hold the sprocket and wheel on and believe me enthusiastic riding/track days/1/4 mile strips will get it hot and make it a pig to remove...it happened to me 3 times
All being said Id have another but maybe as a second bike. My Aprilia by comparison is like a Honda for quality and Aprilia aren't exactly Yamaha or Honda build quality!
The guy that bought my bike from the shop after rejected it after less than 500 miles as it broke down...I must've been lucky
tom_loughlin said:
Thought it was worth asking if the below MV Agusta F4 1000 for sale on PH classifieds owned by anyone on here?
Just wondered if anyone knows anything before I start asking questions to the seller?
http://www.pistonheads.com/classifieds/motorbikes/...
I'm not local, in fact probably ~200 miles away, so trying to suss it out before wasting anyones time.
Questions I have in mind include belt/valve servicing/paperwork - regardless of miles.
Rear bearing/hub issues are apparently common on these earlier machines.
So if anyone owns one, or has any buying suggestions, then I'm all ears.
Cheers
Tom
TomJust wondered if anyone knows anything before I start asking questions to the seller?
http://www.pistonheads.com/classifieds/motorbikes/...
I'm not local, in fact probably ~200 miles away, so trying to suss it out before wasting anyones time.
Questions I have in mind include belt/valve servicing/paperwork - regardless of miles.
Rear bearing/hub issues are apparently common on these earlier machines.
So if anyone owns one, or has any buying suggestions, then I'm all ears.
Cheers
Tom
Mine is a 2009 model registered in 2010 and is the F4 312RR which is 1078cc not 998cc. I am going to tell you a bit about mine as I could be convinced to sell her. This is not an advert.
8200 miles
7 years
Me only owner
Ohlins cartridges in forks
Ohlins rear shock
Marchesini alloy forged wheels
New brake pads
Performance air filter
Microtec ECU with bespoke programme
Bodis titanium slip on exhaust
750 steering stem to reduce rake
3mm swing arm plates
Front mudguard painted like 312R
Single seater Mono posto
CC seat and pad
Swing arm and engine plates painted to match engine
Italian fancy tail tidy
Rear indicators in tailpiece
Uprated billet water pump
Silicone hoses throughout
Alloy rad fans--Unobtainable now
Slipper clutch
Reverse shift drum
Probably another 20 things that I have forgotten.
Every standard part retained
179 bhp at the tyre but at 12:1 so I estimate 185 with the fuelling trimmed. I prefer it a bit rich as its less violent.
I have toured the Pyrenees on her as well as general jaunts in UK. Absolutely zero issues but then again she wants for nothing ever.
I would personally not be paying over £6500 for a 2006 F4 1000 with the heavy star wheels.
Very fast bike mine is.
But the 312 looks better in Monochrome

That was my second F4, the first one had a radiator issue, and was part exchanged for the 312 because a new radiator would have taken 3 months to arrive from Italy.
Gorgeous things, but go in with eyes open. Would heartily agree that the price is erm, optimistic. Might be a "yes of course it's for sale darling" thing.
I'd say it was an optimistic price. I love my MV, I have the F3 (an early one) and aside from a deforming tank issue I have done 8000 trouble free miles.
Warranty work has never been an issue for me but there has been a large amount of instability in the dealer network.m, which looks to be ironing itself out.
There is not a huge community for MV owners in the U.K. although this is slowly changing.
I would not try to dissuade you, but do go into it with your eyes open
Warranty work has never been an issue for me but there has been a large amount of instability in the dealer network.m, which looks to be ironing itself out.
There is not a huge community for MV owners in the U.K. although this is slowly changing.
I would not try to dissuade you, but do go into it with your eyes open
Chipchap said:
The one described above is the Red/Silver F4 312RR which is in the background of the photo. The white F4RR Corsacorta was not a patch on the older bike so she left the building immediately after a 2000 mile 12 day tour to Portugal in July/August 2016.
I ride an 1198 (and a Triumph when it's not sunny) and can't afford another stablemate. So, I certainly can't buy your bike, as lovely as it is. I know it's not an advert, but I'm curious - how much do you think it'd currently be worth? ;-)yajeed said:
I ride an 1198 (and a Triumph when it's not sunny) and can't afford another stablemate. So, I certainly can't buy your bike, as lovely as it is. I know it's not an advert, but I'm curious - how much do you think it'd currently be worth? ;-)
What I think it's worth has no merit really. It's what the market will pay. The chap that looks after my bikes has someone interested at £11500These are mine.


The bottom one has never been used, and was eventually registered 23rd December 2016. I might sell it one day for £20k+, it's the last I suspect.
Top one has 6.5k, but barely used. These machines will never be replicated now. Who cares if there's a wait for parts if needed? Amazing things!
The top one is mad enough, no idea about the other, I started it up once, then gave the battery back to the dealer as it was the wrong one, years ago.
The bottom one has never been used, and was eventually registered 23rd December 2016. I might sell it one day for £20k+, it's the last I suspect.
Top one has 6.5k, but barely used. These machines will never be replicated now. Who cares if there's a wait for parts if needed? Amazing things!
The top one is mad enough, no idea about the other, I started it up once, then gave the battery back to the dealer as it was the wrong one, years ago.
Gassing Station | Biker Banter | Top of Page | What's New | My Stuff




