Discussion
Having attained the ripe old age of 48, I decided I couldn't be arsed crawling around on my hands and knees anymore.
So I treated myself to a Sealey MC454 lift.
Not much use for you weirdos who own bikes without a centre stand, but for us duffers it is a pretty useful tool. I've put a sheet of 12mm ply on the bench to stop the bike slipping around. It comes with a detachable ramp.
I looked at Sky Lifts and other devices, but decided that a good old fashioned bench best suited my needs.
Sealey also do a smaller MC365, but I can't see that being big enough to accommodate anything but the smallest machines.
I should have bought one twenty years ago.
All I need now is a decent bike to put on it.


So I treated myself to a Sealey MC454 lift.
Not much use for you weirdos who own bikes without a centre stand, but for us duffers it is a pretty useful tool. I've put a sheet of 12mm ply on the bench to stop the bike slipping around. It comes with a detachable ramp.
I looked at Sky Lifts and other devices, but decided that a good old fashioned bench best suited my needs.
Sealey also do a smaller MC365, but I can't see that being big enough to accommodate anything but the smallest machines.
I should have bought one twenty years ago.
All I need now is a decent bike to put on it.


OverSteery said:
Pat H said:
All I need now is a decent bike to put on it.
As you can see, the CB350 just fits with the lift at the highest of it's three positions.
I've got an old BMW R100 and it will be interesting to see I get on with that.
I suppose I have the option of relocating to the garage, but I quite like working in the 10 x 8 shed. It's a lot harder to lose things...
Biker 1 said:
Well jealous!
These look good also: https://www.machinemart.co.uk/p/cml3-air-foot-peda...
I've got one of those, well worth the bit extra for the air-operated lift as you'll soon get tired of 'pumping' it up with your foot;These look good also: https://www.machinemart.co.uk/p/cml3-air-foot-peda...

Slightly widening (redrilling) the wheel clamp holes means I can even put a bike in backwards for easier working on the front end and although it takes up a lot of floor space I can park a bike on it.
Really makes working on bikes so much easier, I couldn't do without it.
Edited by catso on Thursday 6th April 16:00
crashley said:
What would you do without a centre stand- just stick it on paddock stands on the bench I presume?
You could do with the bench that I bought, but a lot of them are too narrow for a paddock stand.If I owned a modern sports bike with no centre stand, I might have been tempted to buy an Abba Skylift.
But with a bench you have got somewhere handy to put down the hammer when you need to use the WD40 and visa versa.
Gassing Station | Biker Banter | Top of Page | What's New | My Stuff



