Discussion
Good to see all of the new bikes everyone is getting.
I have been looking for a variety of high spec, mint, very low mile V-twin sports bikes from Honda, Ducati and Aprilia. This one came up first locally - the best and prettiest of the non-homologation spec Ducatis they've ever made (IMHO). With the demise of the V-twin in any sports bike imminent, I'm hoping it will be a good investment too. The 1098 is genuinely a nicer engine than the 1198 to ride on the road, so I don't think I'm going to miss my old 1198's mentalness too much.



I have been looking for a variety of high spec, mint, very low mile V-twin sports bikes from Honda, Ducati and Aprilia. This one came up first locally - the best and prettiest of the non-homologation spec Ducatis they've ever made (IMHO). With the demise of the V-twin in any sports bike imminent, I'm hoping it will be a good investment too. The 1098 is genuinely a nicer engine than the 1198 to ride on the road, so I don't think I'm going to miss my old 1198's mentalness too much.



Edited by 3DP on Saturday 15th April 09:58
3DP said:
........ The 1098 is genuinely a nicer engine than the 1198 to ride on the road, so I don't think I'm going to miss my old 1198's mentalness too much.
You say that like it's a bad thing
but whilst it can be an unruly handful there's a rather simple way to tame the 1198 for the road......... Regardless....Welcome back to the fold

Steve Bass said:
3DP said:
........ The 1098 is genuinely a nicer engine than the 1198 to ride on the road, so I don't think I'm going to miss my old 1198's mentalness too much.
You say that like it's a bad thing
but whilst it can be an unruly handful there's a rather simple way to tame the 1198 for the road......... Regardless....Welcome back to the fold

As BN says, the 1098 is still a good wheelier, it just arcs up nicely in the mid range in 3rd, rather than what seems like off tickover like the 1198!
Sc0tt - yes - C4 GP is ace - perfect family wagon still and not even £1 spent on anything other than consumables/servicing

3DP said:
Funnily enough the top end of the 1198 is no problem, it's the 4000-6000rpm in 2nd, 3rd, 4th that is too monstrous. It's also quite a rough engine - the 1098 is definitely smoother. In my experience the 1098R feels more like a 1098 on steroids than an 1198 - freer revving and more manageable at the bottom end.
As BN says, the 1098 is still a good wheelier, it just arcs up nicely in the mid range in 3rd, rather than what seems like off tickover like the 1198!
Sc0tt - yes - C4 GP is ace - perfect family wagon still and not even £1 spent on anything other than consumables/servicing
Totally agree... from 4k to 8k the 1198 can be a bit overwhelming. As BN says, the 1098 is still a good wheelier, it just arcs up nicely in the mid range in 3rd, rather than what seems like off tickover like the 1198!
Sc0tt - yes - C4 GP is ace - perfect family wagon still and not even £1 spent on anything other than consumables/servicing

But, and it's a huge but... in terms of quality the 1198 is light years ahead of the 1098. Casings quality, gearbox quality all massively improved. 1098's have a nasty habit of getting a wonky gearbox on 3rd gear. 1198 it's not unknown but on 10's it's incredibly common. And wheelies are the death knell for these motors. Oil feed isn't the best and any prolonged time up on the back will see the mains wear excessively or spin a big end..
As for the 1198 the trick is setting up the cam timing. From the factory it's odds on they're out of spec and overly torquey off the bottom but a small shift in the lobe centre numbers really softens the midrange monster and pushes it up the rev range. Suddenly the bike doesn't want to rear it's head every time you touch the gas. A tooth or two down on the rear also helps hugely. Aggressive gearing seems to exacerbate the tendency to wheelie where as longer gearing seems to lift the rear and drive the bike forward. Not sure if it's a matter of the anti squat geo but definitely makes a big difference. 1198 has weird gear ratios as well from standard with 5th and 6th both being effective over drives but the first 4 gears relatively closely stacked. Not sure what Ducati were thinking with that one !!
3DP said:
Good to see all of the new bikes everyone is getting.
I have been looking for a variety of high spec, mint, very low mile V-twin sports bikes from Honda, Ducati and Aprilia. This one came up first locally - the best and prettiest of the non-homologation spec Ducatis they've ever made (IMHO). With the demise of the V-twin in any sports bike imminent, I'm hoping it will be a good investment too. The 1098 is genuinely a nicer engine than the 1198 to ride on the road, so I don't think I'm going to miss my old 1198's mentalness too much.



Aaaa! photos not showing!I have been looking for a variety of high spec, mint, very low mile V-twin sports bikes from Honda, Ducati and Aprilia. This one came up first locally - the best and prettiest of the non-homologation spec Ducatis they've ever made (IMHO). With the demise of the V-twin in any sports bike imminent, I'm hoping it will be a good investment too. The 1098 is genuinely a nicer engine than the 1198 to ride on the road, so I don't think I'm going to miss my old 1198's mentalness too much.



Edited by 3DP on Tuesday 11th April 17:46
Steve Bass said:
3DP said:
Funnily enough the top end of the 1198 is no problem, it's the 4000-6000rpm in 2nd, 3rd, 4th that is too monstrous. It's also quite a rough engine - the 1098 is definitely smoother. In my experience the 1098R feels more like a 1098 on steroids than an 1198 - freer revving and more manageable at the bottom end.
As BN says, the 1098 is still a good wheelier, it just arcs up nicely in the mid range in 3rd, rather than what seems like off tickover like the 1198!
Sc0tt - yes - C4 GP is ace - perfect family wagon still and not even £1 spent on anything other than consumables/servicing
Totally agree... from 4k to 8k the 1198 can be a bit overwhelming. As BN says, the 1098 is still a good wheelier, it just arcs up nicely in the mid range in 3rd, rather than what seems like off tickover like the 1198!
Sc0tt - yes - C4 GP is ace - perfect family wagon still and not even £1 spent on anything other than consumables/servicing

But, and it's a huge but... in terms of quality the 1198 is light years ahead of the 1098. Casings quality, gearbox quality all massively improved. 1098's have a nasty habit of getting a wonky gearbox on 3rd gear. 1198 it's not unknown but on 10's it's incredibly common. And wheelies are the death knell for these motors. Oil feed isn't the best and any prolonged time up on the back will see the mains wear excessively or spin a big end..
As for the 1198 the trick is setting up the cam timing. From the factory it's odds on they're out of spec and overly torquey off the bottom but a small shift in the lobe centre numbers really softens the midrange monster and pushes it up the rev range. Suddenly the bike doesn't want to rear it's head every time you touch the gas. A tooth or two down on the rear also helps hugely. Aggressive gearing seems to exacerbate the tendency to wheelie where as longer gearing seems to lift the rear and drive the bike forward. Not sure if it's a matter of the anti squat geo but definitely makes a big difference. 1198 has weird gear ratios as well from standard with 5th and 6th both being effective over drives but the first 4 gears relatively closely stacked. Not sure what Ducati were thinking with that one !!

The Blade is for long wheelies - TBH - I hate wheelieing Ducatis for some reason - they just don't feel natural landing - probably riding position - plus you are quite locked in longitudinally so not much opportunity to weight manage once up.
I down geared my 1198 (14T front) as it was so intolerable below 30mph. It both made it nicer in town and low speed, but also exacerbated its Hyde side. Anyhoo - as a kneejerk I sold the 1198 that subsequently got lobbed at Paddock hill at 70mph shortly thereafter by its new owner.
For a low mileage usable classic, the 1098S has plenty of poke (did I mention a red frame??!). Only plan is to sort the suspension and lick it occasionally after a good polish.3DP said:
This bike will be doing very few miles. I'm hoping by buying a low mile, minter, I'll never have to worry about casings finish etc 
The Blade is for long wheelies - TBH - I hate wheelieing Ducatis for some reason - they just don't feel natural landing - probably riding position - plus you are quite locked in longitudinally so not much opportunity to weight manage once up.
I down geared my 1198 (14T front) as it was so intolerable below 30mph. It both made it nicer in town and low speed, but also exacerbated its Hyde side. Anyhoo - as a kneejerk I sold the 1198 that subsequently got lobbed at Paddock hill at 70mph shortly thereafter by its new owner.
For a low mileage usable classic, the 1098S has plenty of poke (did I mention a red frame??!). Only plan is to sort the suspension and lick it occasionally after a good polish.
Shame about the 1198 meeting it's demise 
The Blade is for long wheelies - TBH - I hate wheelieing Ducatis for some reason - they just don't feel natural landing - probably riding position - plus you are quite locked in longitudinally so not much opportunity to weight manage once up.
I down geared my 1198 (14T front) as it was so intolerable below 30mph. It both made it nicer in town and low speed, but also exacerbated its Hyde side. Anyhoo - as a kneejerk I sold the 1198 that subsequently got lobbed at Paddock hill at 70mph shortly thereafter by its new owner.
For a low mileage usable classic, the 1098S has plenty of poke (did I mention a red frame??!). Only plan is to sort the suspension and lick it occasionally after a good polish.
As for red frame..... i think gold frame & wheels just shades it

As you say, the 11 is a compromise. 14T on the front makes it work at town speeds but makes it mental at anything above. And going lower on the front of a Duc seems to upset the bike far more than the equivalent off the rear. I struggled for a long time on mine with this. Going back to a bigger front has helped hugely. Funnily enough, going smaller on the back improved it to the point it was actually quicker geared as a 4 or 5 speed box for some tracks.
As for the suspension.. nowt wrong with the S model Ohlins. Nice service and a lighter oil really does the job. Also have the technician check the shim stack configuration. Not uncommon on OEM ohlins to be set up in the wrong order or too many bump stops fitted. Good stuff but the build quality can be sketchy.
So how long before a 998 reappears

Or maybe a 999?????
Steve Bass said:
3DP said:
This bike will be doing very few miles. I'm hoping by buying a low mile, minter, I'll never have to worry about casings finish etc 
The Blade is for long wheelies - TBH - I hate wheelieing Ducatis for some reason - they just don't feel natural landing - probably riding position - plus you are quite locked in longitudinally so not much opportunity to weight manage once up.
I down geared my 1198 (14T front) as it was so intolerable below 30mph. It both made it nicer in town and low speed, but also exacerbated its Hyde side. Anyhoo - as a kneejerk I sold the 1198 that subsequently got lobbed at Paddock hill at 70mph shortly thereafter by its new owner.
For a low mileage usable classic, the 1098S has plenty of poke (did I mention a red frame??!). Only plan is to sort the suspension and lick it occasionally after a good polish.
Shame about the 1198 meeting it's demise 
The Blade is for long wheelies - TBH - I hate wheelieing Ducatis for some reason - they just don't feel natural landing - probably riding position - plus you are quite locked in longitudinally so not much opportunity to weight manage once up.
I down geared my 1198 (14T front) as it was so intolerable below 30mph. It both made it nicer in town and low speed, but also exacerbated its Hyde side. Anyhoo - as a kneejerk I sold the 1198 that subsequently got lobbed at Paddock hill at 70mph shortly thereafter by its new owner.
For a low mileage usable classic, the 1098S has plenty of poke (did I mention a red frame??!). Only plan is to sort the suspension and lick it occasionally after a good polish.
As for red frame..... i think gold frame & wheels just shades it

As you say, the 11 is a compromise. 14T on the front makes it work at town speeds but makes it mental at anything above. And going lower on the front of a Duc seems to upset the bike far more than the equivalent off the rear. I struggled for a long time on mine with this. Going back to a bigger front has helped hugely. Funnily enough, going smaller on the back improved it to the point it was actually quicker geared as a 4 or 5 speed box for some tracks.
As for the suspension.. nowt wrong with the S model Ohlins. Nice service and a lighter oil really does the job. Also have the technician check the shim stack configuration. Not uncommon on OEM ohlins to be set up in the wrong order or too many bump stops fitted. Good stuff but the build quality can be sketchy.
So how long before a 998 reappears

Or maybe a 999?????
1098R hits the aesthetic sweet spot for me. I like the tendency for them to wheelie as I find the low power ones that carry through gears without even trying a proper giggle fest. Luckily I'm not setting laptimes, but I know what you mean about the geometry affecting it. The guy who used to race them where I bought it, said that the best way to stop it wheelieing was just to lift your bum off the seat during hard acceleration so weight goes through the pegs only. I was thinking - I preferring sitting back and shifting back to maximise it 
No 916/998/996 for me - they are just to torturous to ride for me now. I know where there's a nice low miler 999R Fila though in a small private collection...
podman said:
Its beautiful Pete, I was reading a write up in this months Performance Bikes mag on the 10/1198 earlier today, they are still my fave Duke, id sure like one as nice as yours to own...
Thanks Bryan! Saw that too which was nice to read after just buying one. Suspension will be getting sorted on mine, but it feels very healthy anyway so their easy power mods stop at ECU and Exhaust for me for the moment.AdamLoewy said:
Oooh very nice!
Interesting you prefer the 1098 motor, I remember your description of the torque-ladne 1198 lump which convinced me to try one.
Lovely bikes, enjoy!
The 1198 is still the only bike I've ever ridden or owned where I've thought, "This is a little too much - I'd want no more power/torque" Interesting you prefer the 1098 motor, I remember your description of the torque-ladne 1198 lump which convinced me to try one.
Lovely bikes, enjoy!
When I bough the 1198 it was 3 years old. I like to give bikes some grief but I'm mechanically sympathetic in the main. The 1198 was fun to thrash about and be a hooligan on, but when buying a future classic/keeper I like to modify my riding style a bit to be smoother and more flowing to not tax the bike as much in spite of pace being not much different - ok a bit slower! I've ridden a few of the 1*98 series engined Ducatis now and each have a different character. (Pikes Peak Multistrada, 1198, 1098, 1098S, 1098R). The 1098s just seem to be a bit more like older 999/998 on steroids. The 1198 was just brutal - less free revving and more vibey but just mental torque at the bottom. Spareparts 1098R is far more useable than my 1198 was, even though it's about 30bhp up on the 1198 at the top.
Weirdly I reckon I'd be faster point to point on my 1098S than the 1198. The Fireblade is in a different time zone point to point than the 1198. It's just usability. The 1198 reminded me of a sports bike version of my KTM 525EXC. Absolute animal and entertaining for it

I'd have another 1198, but for a spirited occasional ride of a future classic and keeper, the 1098 is nice.
obscene said:
Pete, how do the 10/11 compare to the R? Having only had an R and only rode the 848, I have no idea how they compare. I just know the R is a monster and I love it. I guess the only thing with the same engine I've rode is the Diavel.
It's difficult to give an absolute comparison - The 1098S definite feels much fitter after DP ECU and Termis are fitted - it now wants to wheelie in 4th gear! My 1198 had the same modification, but as Steve Bass said, perhaps mine was particularly punchy off the bottom if the cams came aligned out of the factory to work like that. Additionally, Spareparts' 1098R has had major £££ put into it - especially the engine and is running a full 70mm system and effectively a low compression full WSB spec build! I would imagine it's a lot fitter than a standard 1098R.I would say that the 1098R is very smooth and feels like a 1098S on steroids rather than the 1198. Both feel quite free revving and smooth of the bottom, but punchy as anything. The 1198 has just so much from 4000 rpm, which is where the engine basically starts to work and isn't rattling the clutch etc.
I guess an example would be my 1098S and Spareparts 1098R both have usable 1st gears. My 1198's 1st was fine for pulling away but you wanted to be out of it very quickly. Similarly 2nd. The 1198 is just trying to loop at any throttle opening in 2nd - 3rd was the first usable gear and this was brutal exiting 50mph bends.
In 3rd to top gear roll ons against Sc0tt on his 04 R1, at 50mph, the 1198 just romped away several bike lengths in every gear, in spite of Sc0tt being about 30kg lighter than me (at the time
). The 1098R was pretty much identical to my Blade in roll-ons. My 1198 was definitely faster on roll-ons than my Blade, which tallies with my feeling that the 1098R engine is a revvier motor than the 1198.Not very scientific, I know, but these are my thoughts. If I ever buy an 1198SP, I will have a go at getting the cams timed up to make it feel more like a 1098, just to improve usability and allow me to relax on the bike a bit more when not 'on it'.
Edited by 3DP on Saturday 22 April 22:15
Gassing Station | Biker Banter | Top of Page | What's New | My Stuff


