Coolant change
Author
Discussion

harry020

Original Poster:

56 posts

130 months

Tuesday 18th April 2017
quotequote all
Want to change coolant on my gixxer this weekend. Various forums saying to use distilled water for flushing but local Halfords only sell deionized water - is that OK to use??

Also, can I use deionized water to top up the coolant or does it have to be distilled??


Loyly

18,297 posts

190 months

Tuesday 18th April 2017
quotequote all
They're not the same thing but I used Halfords deionised water in place of distilled in my XJ8 when it started leaking at the coolant tower. Mind you, that was a heap of a V8 that produced a measly power for four litres of displacement, the GSXR is a bit more highly strung, so I'd be tempted to keep it filled with the full content of specified coolant.

If you do top up with distilled or deionised water, make sure you don't dilute the coolant too much or the system will lose a lot of it's effectiveness.

harry020

Original Poster:

56 posts

130 months

Tuesday 18th April 2017
quotequote all
OK to use this coolant??

http://www.wilko.com/car-care-products/wilko-oat-r...

Its nice n cheap!

gareth_r

6,793 posts

268 months

Tuesday 18th April 2017
quotequote all
IIRC, you need silicate-free coolant for some bike engines because the silicates can damage the seals in the water pump.

I must admit, I gave up trying to work out which cheapo car coolant I could get away with, and I just buy Silkolene. smile

trickywoo

14,287 posts

261 months

Tuesday 18th April 2017
quotequote all
What does your kettle look like?

If you don't have much scale your tap water will be soft and fine for mixing coolant IMO.

There are all sorts of scare stories surrounding coolant but finding someone who has had an actual problem (aside from not having correct dilution and it freezing) is quite hard.

I tend to use HOAT as it's multi compatible and has a long service life. 5l which dilutes to 10l is about £20.

pozi

1,725 posts

218 months

Tuesday 18th April 2017
quotequote all
You will be fine with de-ionised water and the OAT Antifreeze.

I just use tap water for a couple of flushes then fill with a 50:50 mix.

Mr OCD

6,388 posts

242 months

Tuesday 18th April 2017
quotequote all
You can buy ready mixed OAT which is what I did ... as mentioned it needs to be silicate free in most modern bikes else you'll be replacing the water pump when the seals fail ...

Halfords do a pretty good 5 year ready mixed silicate free antifreeze for sensible money. Has been fine in the Fireblade.

moanthebairns

19,183 posts

229 months

Wednesday 19th April 2017
quotequote all
http://www.moorespeedracing.co.uk/fluids/COOLANT1L...

i found it a fking mind field, in the end I stuck with the stuff that I use to top up.

I just used tap water to flush as I live in Scotland.

All i know is not to use car stuff.

2wheelsjimmy

624 posts

128 months

Wednesday 19th April 2017
quotequote all
I used halfords pink stuff.

Also do you have a dehumidifier? I use the water from that.
Otherwise, just buy the ready mix stuff. It's not exactly bank breaking.