2015 bike, how rusty!?!?!
2015 bike, how rusty!?!?!
Author
Discussion

kiethton

Original Poster:

14,672 posts

211 months

Wednesday 3rd May 2017
quotequote all
Having a browse as you do and I came across this:



http://www.ebay.co.uk/itm/2015-SINNIS-XF-125-GY-2D...

How on earth does a 2 year old bike get so rusty!?!?

Exhaust looks near gone, the front brackets for mudguards etc is fked and I could swear there are numberous rust blotches on the frame, wheels and block!

If there was ever a reason not to buy chinese....

R1 Dave

7,158 posts

294 months

Wednesday 3rd May 2017
quotequote all
I think you answered your own question in the last sentence!

ambuletz

11,805 posts

212 months

Wednesday 3rd May 2017
quotequote all
must have been used largely off road if those muddy tires and muddy brake pedal is anything to go by. I have a '02 honda 125 that hasn't run for 7+ years and has been open to the elements for at least 5+ years and it's in better condition then that thing.

crofty1984

17,064 posts

235 months

Wednesday 3rd May 2017
quotequote all
Chinese, innit? Even the Yamaha YBR (built in China) is well known for the exhaust turning to st.

trickywoo

14,287 posts

261 months

Wednesday 3rd May 2017
quotequote all
Even if you really looked after that it would still look tatty but that seems to be the perfect combination of neglect and crap quality.

ambuletz

11,805 posts

212 months

Wednesday 3rd May 2017
quotequote all
I wonder how the motorbikes all of these small scale hipster-ish 'custom' motorbike companies would fair? the ones where they import a chinese bike and customize it themselves for you. most of it seems to rust around the bolts whys that? just an area where water stays longer? or inferior quality bolts?

jamiebae

6,245 posts

242 months

Wednesday 3rd May 2017
quotequote all
It's Cat C so I guess it's been underwater or something? Maybe crashed into a ditch/stream or similar?

Rubin215

4,201 posts

187 months

Wednesday 3rd May 2017
quotequote all
So, basically the build quality and materials used in Chinese bikes are no different to a Japanese bike of the 60's and 70's, a Harley pre-2000'ish or a British bike from any time before the 90's?

They'll go a long way...

Krikkit

27,943 posts

212 months

Wednesday 3rd May 2017
quotequote all
ambuletz said:
I wonder how the motorbikes all of these small scale hipster-ish 'custom' motorbike companies would fair? the ones where they import a chinese bike and customize it themselves for you. most of it seems to rust around the bolts whys that? just an area where water stays longer? or inferior quality bolts?
Inferior bolts which rust, they then rust whatever they're attached to. That's why most manufacturers used anodised/BZP bolts.

308mate

13,758 posts

253 months

Wednesday 3rd May 2017
quotequote all
Could just as easily be a BMW (the bike that melts in your driveway, not in your hand) hehe


Biker 1

8,615 posts

150 months

Thursday 4th May 2017
quotequote all
Krikkit said:
Inferior bolts which rust, they then rust whatever they're attached to. That's why most manufacturers used anodised/BZP bolts.
Any non-stainless fasteners are crap & will corrode eventually, especially with a good dose of winter salt. Even the weird coating KTM use on their fasteners I have found fails when you have unbolted something & then put it back to together: http://www.nofmetalcoatings.com/europe/en/coatings...

RizzoTheRat

29,169 posts

223 months

Thursday 4th May 2017
quotequote all
The collector box the <6 month old Buell Ulysses I test rode (dealers demo bike) looked pretty much like that so it's not just the Chinese bikes.

Cbull

4,483 posts

202 months

Thursday 4th May 2017
quotequote all
Would it really cost the manufacturer much more to replace these so called cheap bolts and small metal parts with something a bit more durable. Surely the implications would be minimal and would only help these chinese companies sell more in the long run and rid of this horrid stigma that lurks over them.

crofty1984

17,064 posts

235 months

Thursday 4th May 2017
quotequote all
Rubin215 said:
So, basically the build quality and materials used in Chinese bikes are no different to a Japanese bike of the 60's and 70's, a Harley pre-2000'ish or a British bike from any time before the 90's?

They'll go a long way...
The established brands would do well to be wary of the Chinese, as you have said.
Fun fact, Edward Turner was pleased the Japanese were building small bikes because he assumed that would get more people riding, who would graduate to "proper" bikes like the Tiger/Bonneville/A65.
How he didn't see they'd want a bigger slice of the pie I don't know. But through bad planning, bad management and complacency the British bike industry got bummed right up the arse.
I have a 1969 BSA Starfire, I love it, but when you think it was built the same year as the Honda CB 750, the only surprising thing is that the British motorcycle manufacturers managed to cling on for a full 15 years afterwards.

Moaningroadie

264 posts

223 months

Thursday 4th May 2017
quotequote all
308mate said:
Could just as easily be a BMW (the bike that melts in your driveway, not in your hand) hehe
...or a KTM apparently - http://www.derbytelegraph.co.uk/derby-surgeon-wins...

Jazoli

9,707 posts

281 months

Thursday 4th May 2017
quotequote all
Cbull said:
Would it really cost the manufacturer much more to replace these so called cheap bolts and small metal parts with something a bit more durable. Surely the implications would be minimal and would only help these chinese companies sell more in the long run and rid of this horrid stigma that lurks over them.
Yes, its all about cost, a family friend used to import and pay £280 landed for a generic 125, another £10 spent per bike x thousands of units adds up massively, the quality of components will catch up, but the prices will also rise to a similar level of the established players bikes.