Help with Tomtom rider 2nd edition
Help with Tomtom rider 2nd edition
Author
Discussion

hellsbuddha

Original Poster:

363 posts

274 months

Monday 15th May 2017
quotequote all
Long story but I basically have a brand new TT rider 2. I finally got around to opening and trying to use it. Unfortunately it will not charge via the USB (I used the supplied wall charger and USB cable).

There is another round pin charging port (for use with the car charger) but no cable or charger.

Tomtom are no help, and I can't seem to find a wall charger with the round pin.

Any ideas of how I can get it working? I have tried the reset button and held the power button down for 30 seconds.

Thanks

sjtscott

4,215 posts

262 months

Monday 15th May 2017
quotequote all
My Tom Tom Rider V1 doesn't charge over USB only charges from the round two pin port using the supplied charger or the bottom custom power point connector for the bike flying lead power which goes into the mounting dock.
I'm guessing they fixed in on the V2 then to charge off USB.

You mean you can't find one like this?
http://www.ebay.co.uk/itm/Genuine-Tomtom-POWER-SUP...

hellsbuddha

Original Poster:

363 posts

274 months

Monday 15th May 2017
quotequote all
Thanks that's the one, I kept finding the USB ones. I will try that and see if it works. I connected it to my laptop but it could not find the unit. It maybe the whole thing is not working via USB even though it's brand new!

sjtscott

4,215 posts

262 months

Monday 15th May 2017
quotequote all
hellsbuddha said:
Thanks that's the one, I kept finding the USB ones. I will try that and see if it works. I connected it to my laptop but it could not find the unit. It maybe the whole thing is not working via USB even though it's brand new!
I guess try to see if you can jump it into life of this other charging point with this charger. I found with my V1 that the battery really can get into a low state and might take a while to charge enough to fire up- could be similar issue if you've not used it for a while.
Also another thing I got the powered car dock for my V1 which runs off a cig lighter supply to the same design round pin on the car dock/windscreen mount itself - if you dock my V1 to either the powered car dock or bike mount powered dock it self powers on i.e. you don't have to fumble around trying to get the power switch to work - on the v1 the power switch is very very poorly designed and needs a hard press in the correct place with a thumbnail basically. I can only hope they fixed this with the V2?

hellsbuddha

Original Poster:

363 posts

274 months

Monday 15th May 2017
quotequote all
Thanks I will get a cheap charger to see if it works.