Paddock stand - basics
Paddock stand - basics
Author
Discussion

Fearful fifer

Original Poster:

24 posts

131 months

Sunday 21st May 2017
quotequote all
Hello,

Idiot maintenance question.

I have a xsr700, no centre stand and just the standard swing arm, will the below work on the bike - I.e do the cups just align to the rear axle and then lift?
https://www.amazon.co.uk/d/Automotive/5161-Black-A...

I presume that the other stands with bobbins are more secure if so, how easy are the bobbins to fit to the rear axle?

I would stress my maintenance skills are basically, cleaning, lubing and worrying!

Gavia

7,627 posts

122 months

Sunday 21st May 2017
quotequote all
You simply align the cups to your swingarm and that's it done. I don't like those sort of stands and prefer the bobbin ones. Fitting them is as simple as screwing a bolt into the pre existing holes on the swingarm. I'm assuming your model has the existing holes though.

Getting the bike onto a paddock stand is very easy, but nerve racking the first few times you try it.

trickywoo

14,287 posts

261 months

Sunday 21st May 2017
quotequote all
Abba stand? Costs a bit more than a paddock stand but allows you to do more as your skills grow.

Gunk

3,302 posts

190 months

Sunday 21st May 2017
quotequote all
^^^^ +1


Fearful fifer

Original Poster:

24 posts

131 months

Sunday 21st May 2017
quotequote all
I like the security of the abba stands but they are a bit ££££££. If the bobbins are easy to fit then maybe that's the better options as I believe they offer an element of protection for the swing arm in a crash.

Loyly

18,295 posts

190 months

Sunday 21st May 2017
quotequote all
I've got a single sided swing arm on my Triumph Daytona, I always try to get a hand when I put the bike on the stand, just someone to hold it steady whilst I hook it up and do the lift. I could probably do it on my own without issue but I like to have someone on standby to shout at in the event something goes wrong.

kwaka jack

270 posts

203 months

Sunday 21st May 2017
quotequote all
A paddock stand that uses bobbins will be a lot more secure that a universal fit one. According to google the bobbins for your swing arm are these and yes it is just a case of lining the hooks on the stand with the bobbins and pushing down.

https://evotech-performance.com/products/yamaha-xs...

Should be pretty easy to fit. As posted above Abba stands are better but more wonga, not sure if they come with but you also need the correct adaptors for the holes in your frame for the abba stand.

It all depends on what your doing with it. If like you say your mechanic skills are basic, are you going to need the added benefits of a abba stand? If your only using it to clean, adjust the chain, wheel rear etc then I'd go for the normal paddock stand. If your looking to expand your mechanical know how and start removing swing arms etc then an abba stand will be a massive benefit.

Edited by kwaka jack on Sunday 21st May 21:26


Edited by kwaka jack on Sunday 21st May 21:28

Fearful fifer

Original Poster:

24 posts

131 months

Sunday 21st May 2017
quotequote all
Sounds good, I know my limitations so will prob just go for the bobbins. I presume most paddock stands will be universal I.e. I don't need a specific stand for this bobbins.

Sorry again for the basis questions - I have been biking for 6 years but always had a centre stand

leighz

473 posts

163 months

Sunday 21st May 2017
quotequote all
seriously - get an abba stand - they are worth every penny

my rear paddock stand is gathering a thick patina of dust having been unused since I bought an abba a few years ago. They are way more secure and waaaaay easier to use.

BobSaunders

3,110 posts

186 months

Sunday 21st May 2017
quotequote all
For me personally -

Bobbin stand +1 for temporary lay up of a few days at a time i.e. summer time.

I have Abba Superbike stand two for taking the weight off the wheels if the bike is laid up for more than a few days i.e. winter. Takes about 10 minutes to put it on and off properly (slowly and carefully), and means i can shift it around the garage into the corner (including spinning it around).

However, i wish i had gone for the Abba skylift on wheels.

Gavia

7,627 posts

122 months

Sunday 21st May 2017
quotequote all
I'll never understand why people bang on so much about Abba stands. Unless you're doing all the mechanical work yourself on your bike then they're an expensive luxury. A paddock stand with bobbins is going to cost £50 all in, even with the R&G ones that provide some crash protection too you're still looking at well under £100.

The OP has said he has limited mechanical skill and I don't see that having any mechanical skill is needed nowadays on bikes.

jjones

4,492 posts

224 months

Sunday 21st May 2017
quotequote all
Gavia said:
I'll never understand why people bang on so much about Abba stands. Unless you're doing all the mechanical work yourself on your bike then they're an expensive luxury. A paddock stand with bobbins is going to cost £50 all in, even with the R&G ones that provide some crash protection too you're still looking at well under £100.

The OP has said he has limited mechanical skill and I don't see that having any mechanical skill is needed nowadays on bikes.
Me neither, front and rear stands for maintenance and for the rare occasions i want to remove the swing arm i ratchet strap the bike from the ceiling joist.

BobSaunders said:
I have Abba Superbike stand two for taking the weight off the wheels if the bike is laid up for more than a few days i.e. winter.
Always left on the side stand otherwise, sometimes for months at a time!!! and never had any issues with the tyres.

R1 Dave

7,158 posts

294 months

Sunday 21st May 2017
quotequote all
+1 for bobbins. Those cup lift ones, IME, can scratch the swing arm and tend to bend downwards which I suspect could lead to the bike sliding off (though this didn't happen to me when I had one).

If you want to spend a bit more then the Bursig style ones are very good but it's probably overkill for the sort of work you'll be doing.

Mr2Mike

20,143 posts

286 months

Sunday 21st May 2017
quotequote all
Gavia said:
I'll never understand why people bang on so much about Abba stands. Unless you're doing all the mechanical work yourself on your bike then they're an expensive luxury.
1) Plenty of people do all the work on their bikes.
2) Some people seem to get very nervous holding a bike vertical to get a paddock stand under the swingarm or bobbins.

They are overpirced IMO and I don't have one (I have a handy RSJ and a winch), but I can certainly see why people like them.

Gavia

7,627 posts

122 months

Sunday 21st May 2017
quotequote all
Mr2Mike said:
Gavia said:
I'll never understand why people bang on so much about Abba stands. Unless you're doing all the mechanical work yourself on your bike then they're an expensive luxury.
1) Plenty of people do all the work on their bikes.
2) Some people seem to get very nervous holding a bike vertical to get a paddock stand under the swingarm or bobbins.

They are overpirced IMO and I don't have one (I have a handy RSJ and a winch), but I can certainly see why people like them.
Maybe I should've clarified it a bit more. I'll never understand why people bang on so much about Abba stands to a question that's npbeen asked by someone who readily admits that they aren't mechanically adept or interested in becoming that.

Fearful fifer

Original Poster:

24 posts

131 months

Sunday 21st May 2017
quotequote all
Bit the bullet and bought the bobbins and stand on a popular auction site for about £58 all in..

If I drop the bike on the first few attempts I know who to blame😉😉

Biker 1

8,615 posts

150 months

Monday 22nd May 2017
quotequote all
Fearful fifer said:
Bit the bullet and bought the bobbins and stand on a popular auction site for about £58 all in..

If I drop the bike on the first few attempts I know who to blame????
It'll be absolutely fine!! Maybe get a helper for the first couple of trial runs, but its very easy & I suspect your bike's quite light. Whatever you do, remember to double check the side stand is down BEFORE you lower the bike off the paddock stand. Been there......

Spanglepants

1,743 posts

168 months

Monday 22nd May 2017
quotequote all
I bought a paddock stand a few weeks ago with the bobbins and it doesn't work. Bobbins don't stick out far enough for the stand, its got a braced swing arm and the fittings on the stand go past and above the bobbins andscrape the main swinging arm (if that makes sense).
Luckily my mate offered me an unused Abba stand for £25 , picking it up today.

gareth_r

6,792 posts

268 months

Monday 22nd May 2017
quotequote all
If you're not confident putting the bike on the rear stand, or even if you just want to make life easier, buy a roll-on front wheel stand/chock as well.

bigralphie

25 posts

114 months

Monday 22nd May 2017
quotequote all
a 2" piece of wood etc (I use an old flag stone) under the side stand will pre lift the bike and makes it easier to line up the hook to the bobbins before you commit