Throttle blip or lean the slipper clutch?
Discussion
Just watching Geroge's Cadwell video (for example - not picking on you George) and I noticed he bangs it down through the gears and (as he didnt have an epic compression lock) I assume he's leaving it to the slipper clutch to cope with the road speed differential. I am a throttle blipper but really only because I haven't ridden a slipper equipped bike in anger.
Is one way better than the other? I'm renting a bike on Monday, no idea if it has one or not. Might just stick with what I know...
What is the bike your riding?
If its got a slipper clutch ... use it ... if it hasn't then throttle blip if you can as locking the rear wheel up loosens the bowels ...
Also depends on the track. I used to lock the rear wheel on the R1 into hatchets at Pembrey until I had a lightbulb moment!
If its got a slipper clutch ... use it ... if it hasn't then throttle blip if you can as locking the rear wheel up loosens the bowels ...

Also depends on the track. I used to lock the rear wheel on the R1 into hatchets at Pembrey until I had a lightbulb moment!

Mr OCD said:
What is the bike your riding?
If its got a slipper clutch ... use it ... if it hasn't then throttle blip if you can as locking the rear wheel up loosens the bowels ...
Also depends on the track. I used to lock the rear wheel on the R1 into hatchets at Pembrey until I had a lightbulb moment!
Spec is as follows (lifted straight from website): :Suzuki GSXR750 L0 (Race spec) 1 available £275.00:If its got a slipper clutch ... use it ... if it hasn't then throttle blip if you can as locking the rear wheel up loosens the bowels ...

Also depends on the track. I used to lock the rear wheel on the R1 into hatchets at Pembrey until I had a lightbulb moment!

:Ohlins TTX rear- K-TECH front - GPR steering damper - HM Quickshifter - Adjustable rearsets –- Renthal 520 conversion set to track - Hel brake lines- SBS race brake pads – Full race exhaust- Full race bodywork- Pirelli supercorsa tyres - GB racing engine covers:
Brands GP
If the slipper clutch can still brought undone, I'll stick to blipping.
Edited by 308mate on Thursday 1st June 13:32
Having gone from a Ducati 749s on track that use to slide the back end all over the place when being a tad heavy on downshifts and going to a ZX6R with a slipper clutch there is a HUGE difference, however as others mentioned when being a hamfisted the back end will slide slide about on the ZX6R even with the slipper.
I just let the slipper do it's job and don't blip.
Edit to add - thinking about it, I blip (rev match) every day on the road bike (R1200GS) and it just comes naturally now, but I don't even bother on track because of the different clutches.
I just let the slipper do it's job and don't blip.
Edit to add - thinking about it, I blip (rev match) every day on the road bike (R1200GS) and it just comes naturally now, but I don't even bother on track because of the different clutches.
Edited by Bikesalot on Thursday 1st June 14:16
Throttle blipping is great skill and satisfying, I have to do it on my road bike (Z1000sx) otherwise the engine braking can make get out of shape and lurch about.
On the track a slipper is a must and from my understanding a L0 GSXR comes with one as standard. On my R1 track bike I never really have to blip on the downshift as my slipper sorts it out and its amazing. However when I am coming of a long straight and braking quite late and so shifting down late I tend to give a little blip to help it out. Not sure its really that necessary if I am honest. Its probably just muscle memory.
On the track a slipper is a must and from my understanding a L0 GSXR comes with one as standard. On my R1 track bike I never really have to blip on the downshift as my slipper sorts it out and its amazing. However when I am coming of a long straight and braking quite late and so shifting down late I tend to give a little blip to help it out. Not sure its really that necessary if I am honest. Its probably just muscle memory.
I always blip - force of habit
Found on my mv if you went down quick the rear wheel go at a slower speed than front and give a kinda slide feeling. Not sure if anyone else has had similar
My first gsxr track bike didn't have one so learnt to be smooth. Newer one does but I've never felt or noticed tbh
Found on my mv if you went down quick the rear wheel go at a slower speed than front and give a kinda slide feeling. Not sure if anyone else has had similar
My first gsxr track bike didn't have one so learnt to be smooth. Newer one does but I've never felt or noticed tbh
mckeann said:
I bang down the box 1 gear at a time with no slipper. In theory you can do 3 or 4 downshifts then a single clutch release but I prefer to know every gear has engaged and no mis shifts.
I clutch in after every gearshift. I don't trust myself not to f
k up the downshifts. When I started riding my CG125 had a really sloppy box, which could be difficult to find first in! I didn't help myself by bracing hard under braking, whilst pulling in the clutch and stamping down several gears at once. It wasn't a tough habit to break once I realised how badly it was affecting my riding when I was coming to a stop. These days I always try to blip my downshifts. The one benefit of learning my craft on a 20 year old sports bike is that it doesn't have modern assists. I've got to learn braking, cornering, counting the gears, shifting and blipping all without technology. I fancy that if I can learn to ride this then I can ride anything.
Biker's Nemesis said:
In just bang on the brakes and gear lever now and hope for the best, one of the pluses having a bike with a slipper clutch and loads of electronics.
I think it's physically impossible to get bored of an auto-blipper. Grabbing plenty of brake and going from 6th to 2nd in a couple of seconds is amazing 
Rawwr said:
I think it's physically impossible to get bored of an auto-blipper. Grabbing plenty of brake and going from 6th to 2nd in a couple of seconds is amazing 
My current bike has it. I only find it rewarding when I'm coming down from sky high revs or road speed. Otherwise I find it annoying. Would rather to do it myself I think. Will take ma lap or two to get back in the habit of even using the clutch.
Loyly said:
The one benefit of learning my craft on a 20 year old sports bike is that it doesn't have modern assists. I've got to learn braking, cornering, counting the gears, shifting and blipping all without technology. I fancy that if I can learn to ride this then I can ride anything.
There's a lot to be said for that.So I can understand if you have the right slipper kit fitted or the nice modern RBW bike blips it for you but purely out of control vs mechanical sympathy I'm surprised more riders don't blip on down changes!
I just programmed and taught myself starting on old school zero tech sports bikes that you blip/attempt to rev match on downshifts and thats riding on the road. Each to their own. I particularly found on almost every bike I've owned to get a nice smooth downchange to first (for those times when you know you have to) a proper blip really makes this very easy.
The only bike that really needed assistance on downchanges was my old falco with the mille 1000cc Twin it had a back torque limiter I guess lower cheap tech than a slipper clutch but achieved similar results. If you were a little ham fisted, just banged the gear down or not enough revs on the downshift blip when enjoying yourself the gear/rear would appear to 'delay' in engaging even though the clutch lever was fully out, was a little surreal but you did get used to it after a while then it became normal.
I don't ride on the track so don't push my bikes to the same levels as some will naturally because you'll either be going to prison or worse case dying doing so on the public road.
I will say I loved riding my mates old RGV250 - you could play GP racers and bang it down the gears with zero engine braking or need to blip.. easy peasy and great fun
I just programmed and taught myself starting on old school zero tech sports bikes that you blip/attempt to rev match on downshifts and thats riding on the road. Each to their own. I particularly found on almost every bike I've owned to get a nice smooth downchange to first (for those times when you know you have to) a proper blip really makes this very easy.
The only bike that really needed assistance on downchanges was my old falco with the mille 1000cc Twin it had a back torque limiter I guess lower cheap tech than a slipper clutch but achieved similar results. If you were a little ham fisted, just banged the gear down or not enough revs on the downshift blip when enjoying yourself the gear/rear would appear to 'delay' in engaging even though the clutch lever was fully out, was a little surreal but you did get used to it after a while then it became normal.
I don't ride on the track so don't push my bikes to the same levels as some will naturally because you'll either be going to prison or worse case dying doing so on the public road.
I will say I loved riding my mates old RGV250 - you could play GP racers and bang it down the gears with zero engine braking or need to blip.. easy peasy and great fun

Edited by sjtscott on Saturday 3rd June 09:34
Gassing Station | Biker Banter | Top of Page | What's New | My Stuff




