Discussion
Anyone got a recommendation, based on experience?
Seen a few and one that seems to be popular, but a few reviews saying it's not that strong and the plates bend.
The one I saw http://www.theramppeople.co.uk/extra-strong-motorc...
Seen a few and one that seems to be popular, but a few reviews saying it's not that strong and the plates bend.
The one I saw http://www.theramppeople.co.uk/extra-strong-motorc...
Edited by 2wheelsjimmy on Friday 9th June 18:59
50 quid folding ones off ebay are fine. Used my for crossers and big bikes for 5 years, no issues. worth getting the padded bag for it, less rattly in the back of the van and saves it damaging anything if you get bombing round roundies.
Also the ebay wheel chocks are fine and cheap too.
Also the ebay wheel chocks are fine and cheap too.
poo at Paul's said:
50 quid folding ones off ebay are fine. Used my for crossers and big bikes for 5 years, no issues. worth getting the padded bag for it, less rattly in the back of the van and saves it damaging anything if you get bombing round roundies.
Also the ebay wheel chocks are fine and cheap too.
I've got a 50 quid ebay one too. It copes with my trail bikes and Triumph and is easy to re-position when loading more than one bike into the van . Look out if the ramp gets wet as there's little grip offered for the tyres. They're quite light too, but have hard and sharp edges, so secure it to the side/floor of the van when not in use.Also the ebay wheel chocks are fine and cheap too.
Just bought one of these but not used it yet. Similar design, £46 and free postage.
http://www.demon-tweeks.co.uk/motorcycle/workbench...
http://www.demon-tweeks.co.uk/motorcycle/workbench...
Moulder said:
Just bought one of these but not used it yet. Similar design, £46 and free postage.
http://www.demon-tweeks.co.uk/motorcycle/workbench...
Same as I use, a little tip if using with big bikes, is drill the red fingers and put a couple f screws through, then similar holes in the threshold of the van back floor to hook them into. Otherwise, when reversing out, and braking on the ramp, if can slip backwards off the van floor!! http://www.demon-tweeks.co.uk/motorcycle/workbench...
I use two ramps. I get some crap for it from my mates, but the amount of poeple Ive seen slip on steps or trying to step up into their vans and dropped bikes is pretty big.
Makes loading a piece of cake, bike up one ramp and walk up the other
I echo what's said above though, drill a couple of bolts through the red fingers on the end and hook them into the holes at the back of the van. Especially if you're clutching the bike up, as I found out the hard way that a bike will easily spit the ramp off the van and drop onto it's belly pan on the ledge
Makes loading a piece of cake, bike up one ramp and walk up the other
I echo what's said above though, drill a couple of bolts through the red fingers on the end and hook them into the holes at the back of the van. Especially if you're clutching the bike up, as I found out the hard way that a bike will easily spit the ramp off the van and drop onto it's belly pan on the ledge

poo at Paul's said:
Same as I use, a little tip if using with big bikes, is drill the red fingers and put a couple f screws through, then similar holes in the threshold of the van back floor to hook them into. Otherwise, when reversing out, and braking on the ramp, if can slip backwards off the van floor!!
This is a properly good tip, I have one which works very well but if you don't secure it, it can all go horribly wrong!graeme4130 said:
I use two ramps. I get some crap for it from my mates, but the amount of poeple Ive seen slip on steps or trying to step up into their vans and dropped bikes is pretty big.
Makes loading a piece of cake, bike up one ramp and walk up the other
I echo what's said above though, drill a couple of bolts through the red fingers on the end and hook them into the holes at the back of the van. Especially if you're clutching the bike up, as I found out the hard way that a bike will easily spit the ramp off the van and drop onto it's belly pan on the ledge
Another vote for two ramp loading. I clutch it up on my own so it's a pig with one ramp. Rather than drill the ramp I put a strap from the bottom of the ramp onto the rear door locking loop on the floor to stop it slipping back.Makes loading a piece of cake, bike up one ramp and walk up the other
I echo what's said above though, drill a couple of bolts through the red fingers on the end and hook them into the holes at the back of the van. Especially if you're clutching the bike up, as I found out the hard way that a bike will easily spit the ramp off the van and drop onto it's belly pan on the ledge

Gassing Station | Biker Banter | Top of Page | What's New | My Stuff


