93 zxr750 leaving fuel petcock turned on?
Discussion
Bugger, restoring this bike and had it sitting for a while, tried to start it but it was like it was flooded(new plugs, oil etc last week) , eventually it 'sort of' tried to run, but just died when giving it throttle.
Had a quick look on line and first thing i spotted was people saying not to leave the petcock on? Sure as hell, looked at oil level glass and it had shot up, petrol contaminating the new oil i just put in! Damnit!
Is it a good habit to turn fuel off all the time if it's to be sitting overnight/for a while? Can't remember having this problem with my 92 Blade? I've dumped oil and drained carbs, just wish i had twigged quicker and not tried to keep it running, knowing now fuel was in oil.
Had a quick look on line and first thing i spotted was people saying not to leave the petcock on? Sure as hell, looked at oil level glass and it had shot up, petrol contaminating the new oil i just put in! Damnit!
Is it a good habit to turn fuel off all the time if it's to be sitting overnight/for a while? Can't remember having this problem with my 92 Blade? I've dumped oil and drained carbs, just wish i had twigged quicker and not tried to keep it running, knowing now fuel was in oil.
I think the early 'blades had a fuel pump, hence not flooding with ignition off. Later (carb) blades didn't have a pump. (I think I got this right, had a 93 & 98 and I'm sure I felt this difference was unusual).
Always good idea to turn fuel off, especially when bike only has side stand - have heard stories of hydraulic lock on left and cylinders in the past.
Always good idea to turn fuel off, especially when bike only has side stand - have heard stories of hydraulic lock on left and cylinders in the past.
my zx9r had the same problem, its the weight of the fuel pushes through the fuel pump and float bowls then into the cylinders and crankcase. Shouldn't happen, but does. New float pin seals and good adjustment should cure, but for the cost of oil and filter, I'd get used to switching the tap.
I think your tap should be a vacuum one (does it have on/res(erve) and Pri(ime) options?
If so the diaphragm has most likely failed within it, they are not difficult to rebuild...then of course its just a case of sorting the carbs but of the tap is working as it should, it shouldnt cause a problem further down the line anyway.
If so the diaphragm has most likely failed within it, they are not difficult to rebuild...then of course its just a case of sorting the carbs but of the tap is working as it should, it shouldnt cause a problem further down the line anyway.
podman said:
I think your tap should be a vacuum one (does it have on/res(erve) and Pri(ime) options?
If so the diaphragm has most likely failed within it, they are not difficult to rebuild...then of course its just a case of sorting the carbs but of the tap is working as it should, it shouldnt cause a problem further down the line anyway.
Mine's just has on,off and reserve.Just a quick background,bought bike,guy was good enough to put a thimbleful of fuel in it to let me hear it run,i then put fuel in it,put tap from reserve to on,it started fine after that,second time I started it after having fuel tap on all the time for two weeks it's now like this.If so the diaphragm has most likely failed within it, they are not difficult to rebuild...then of course its just a case of sorting the carbs but of the tap is working as it should, it shouldnt cause a problem further down the line anyway.
I'll just start putting it to off to be safe.
Gassing Station | Biker Banter | Top of Page | What's New | My Stuff


