Akrapovic exhaust strap rivet
Discussion
Make sure it is a SOLID "gas-proof" rivet with the enclosed tip,
using a normal rivet is not good as the tip of the center will snap off and rattle in your end can.
Oh yeah, they are an absolute bugger to pop with a standard rivet tool, Popeye / Hulk stuff,
have a good breakfast before or look for someone with a levered or powered rivet tool.
AND watch out,
once it´s finally popped the sharp end of the center piece still held by the tool will stick out
and can put a pretty scratch in your outer layer of end can....don´t ask how I know that....
using a normal rivet is not good as the tip of the center will snap off and rattle in your end can.
Oh yeah, they are an absolute bugger to pop with a standard rivet tool, Popeye / Hulk stuff,
have a good breakfast before or look for someone with a levered or powered rivet tool.
Edited by Benni on Sunday 18th June 23:36
AND watch out,
once it´s finally popped the sharp end of the center piece still held by the tool will stick out
and can put a pretty scratch in your outer layer of end can....don´t ask how I know that....
Edited by Benni on Sunday 18th June 23:39
Edited by Benni on Sunday 18th June 23:40
Gassing Station | Biker Banter | Top of Page | What's New | My Stuff




